2 x 300 W, HV LED lamps typically 2 x 3 ... 60 W
REG housing 4 TE
ETS product family Lighting
Product type Dimmer
Intended use
Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps (from device version V04)
Installation on top hat rail according to DIN EN 60715 in sub-distribution board
Product features
Automatic or manual setting of the dimming principle suitable for the load Idle
, short-circuit and overtemperature proof
Message in the event of a short circuit
Outputs can be operated manually
Feedback of the switching state and the dimming value
Configurable switch-on and dimming behavior
Time functions: switch-on, switch-off delay, staircase light switch with advance warning function
Light scene operation
Locking of individual outputs manually or via bus
Status display of the outputs via LED
Operating hours counter
Power failure for longer than approx. 5 seconds switches off the dimmer actuator. Depending on the parameter setting, the connected load is re-measured after the power is restored.
Power can be expanded using power add-ons (item no. ULZ 1755 REG)
Optional accessories: LED compensation module, item no.: KM LED 230 U