ETS product family lighting
Product type dimmer
The device is KNX Data Secure compatible. KNX Data Secure offers protection against manipulation in building automation. A dedicated application is required for secure operation. Further information can be found at: KNX Secure
Intended use
Switching and dimming of lighting
Reading in switching states of installation switches or buttons and other potential-free contacts at inputs 1...3
Signal evaluation of condensation sensors (item no.: BTS 01) and leakage sensors (item no.: LES 01) at inputs 1...3
Recording temperature values via NTC temperature sensors (item no.: FF 7.8) at input 3
Installation in device box in accordance with EN 60670-1
Product features
Output can be operated via KNX telegrams or extension inputs
Three extension inputs for connecting potential-free contacts or condensation/leakage sensors. NTC temperature sensor can be connected to input 3.
Supply via bus, no additional supply voltage required
KNX Data Secure compatible from ETS 5.7.3
Updateable with ETS Service App
Properties Dimming operation
Automatic or manual setting of the dimming principle suitable for the load
Idle, short-circuit and overtemperature proof Short
-circuit notification Feedback on
the switching state and dimming value
Configurable switch-on and dimming behavior
Time functions: On, switch-off delay, stairwell light switch with advance warning function
Light scene operation
Operating hour counter
A power failure lasting longer than approx. 5 seconds switches off the dimming actuator. Depending on the parameter setting, the connected load is re-measured after the power is restored.
Performance expansion possible through performance add-ons (Article No. ULZ 1755 REG)
Properties Extension input
Operating functions Switching, dimming (including color temperature dimming), blind control, value transmitter (1-byte, 2-byte, 3-byte and 6-byte including RGBW and color temperature specifications), scene extension, etc.
Locking function
Debounce time adjustable
Properties Logic
Logic gate
Converter (conversion)
Locking element
Comparator
Limit switch