with integrated bus coupler
ETS product family Phys. Sensors
Product type Motion detector
Intended use
Demand-based control of lighting, room thermostats and other electrical consumers indoors
Ceiling mounting on solid ceilings in a device box according to EN 60670-1 or surface-mounted housing Item no.: PM-KAPPE-1 or PM-KAPPE AL-1
Product features
Integrated bus coupler
3 PIR sensors
360° detection field
Integrated brightness sensor
Use as a presence detector, motion detector or for reporting operation
Output functions: Switching, stairwell function, switching with forced position, value transmitter, light scene extension, operating mode specification for room temperature controller
Extension of the detection range by operating several devices as main and extension units
Adjuster for manual correction of the sensitivity
Status LED: Flashes when movement is detected, depending on the programming in normal operation or only during the walk test operation
Additional features 'Universal' version:
Manual operation with IR remote control possible (item no. KNX PM FB IR)
5 function blocks for motion detection, each with 2 outputs
Function blocks can be switched, e.g. for day/night operation
PIR sensors can be evaluated separately
Brightness sensor function with 3 limit values
Daylight-dependent light control with max. 3 channels, setpoint shift during operation, separate configuration of control, regulation and reduction phases
Light control can be combined with presence detector function Presence
detector function:
detection of the smallest movements, e.g. at a workstation to detect the presence of people
Switch on: motion detection and brightness threshold undershot
Switch off: no movement in the detection field and run-on time elapses, or brightness threshold exceeded
Motion detector function:
detection of movements to secure traffic routes in buildings
After responding and switching on, the motion detection works regardless of the brightness.
Reporting mode:
detection of movements in the detection field independent of brightness
Switch on: after detecting an adjustable number of movements within the set monitoring period
Switch off: no movement in the detection field and run-on time elapses