REG housing 8 HP
with electronic manual operation and LED status display.
Planning and commissioning with ETS5 or newer
ETS product family. Output
product type binary output mix.
The device is KNX Data Secure compatible. KNX Data Secure offers protection against manipulation in building automation. A dedicated application is required for secure operation. Further information is available at: KNX Secure
Intended use
Switching electrical consumers with potential-free contacts
Switching electrically operated blinds, roller shutters, awnings and similar hangings
Installation on top hat rail in accordance with DIN EN 60715 in sub-distribution boards
Product properties
Outputs can be operated manually, construction site operation
Feedback in manual operation and in bus operation
Blocking individual outputs manually or by bus
Central functions
Cyclic monitoring
KNX Data Secure compatible from ETS 5.7.3
Updateable with ETS service app
Properties Switch operation Normally
open or normally closed
operation Feedback function
Linking and forced operation function
Central switching function with collective feedback
Time functions: On, off delay, staircase light switch with pre-warning function
Scene function
Operating hour counter
Properties Blind operation
Suitability for AC motors 230 V
Operating modes 'Blind with slats', 'Roller shutter/awning', 'Ventilation flap/skylight' Blind
position can be controlled directly
Slat position can be controlled directly
Feedback from Driving state, blind position and slat position
Cyclic feedback in driving state
Forced position by higher-level control
Safety function: rain alarm, frost alarm, 3 independent wind alarms
Sun protection function with automatic heating/cooling
Only load adjacent outputs to such an extent that the sum of their output currents is max. 20 A.