JUNG 106.28, EAN: 4011377213609

JUNG 106.28 Key Switch 2P 16A

Installation > Switch Material > Switch Electronics

JUNG 106.28 Key Switch 2P 16A

Lieske Part No. 242796
Mfg Part No 106.28
EAN-Code 4011377213609
Manufacturer JUNG
Here only 66,22 EUR
78,80 EUR incl. VAT

Further information for JUNG 106.28 Key Switch 2P 16A

General
Switching functionoff-on changeover switch
Number of poles2-pole
Nominal current16 A
Nominal voltage250 V~
Terminal typeScrew terminals
Conductor cross sectionup to 2.5 mm²
Terminal standardDIN VDE 0632 (EN 60669)
Cylinder compatibilityProfile cylinder DIN 18252, approx. 40 mm total length
Cover removalOnly possible in unlocked position
The JUNG key switch type 106.28 is a two-pole, universally applicable off-changeover switch, specifically designed for use in electrical installations. It enables electrical control of consumers via an integrated profile half-cylinder, operated by a key. The switch function is activated by the mechanical position of the cylinder, thereby closing or opening the electrical circuit. This switch is particularly suitable for applications requiring controlled and authorized operation, such as in blind systems, electric roller shutters, or other electrically operated devices that must only be operated by authorized persons.

Applications

The key switch 106.28 is used in installations where mechanical and electrical locking must be combined. It is particularly suitable for use in buildings with increased security requirements, where operation of electrical devices must only be performed by persons holding the appropriate key. Typical use is in blind or roller shutter systems, where mechanical actuation of the cylinder directly triggers the electrical control of the drive. The switch function is universally applicable, allowing it to be configured either as an off-switch or as a changeover switch, depending on the connection configuration.

Functions and Equipment in Detail

The switch features a two-pole switching function with a rated current of 16 Amperes and a rated voltage of 250 Volts AC. Electrical connections are made via screw terminals designed for rigid and flexible conductors up to a cross-section of 2.5 mm². The terminals comply with standards DIN VDE 0632 (EN 60669) and are equipped with screw fastening, without any clamping claws. The cover of the key switch can only be removed when the integrated profile half-cylinder is in the unlocked position, enabling safe disassembly without electrical hazard.

Technology Explained Simply

The switching function is triggered by the mechanical movement of the profile half-cylinder. When the cylinder is rotated into the unlocked position, the electrical contact is closed, activating the connected consumer. When rotated back into the locked position, the contact opens and interrupts the circuit. The screw terminals allow for a secure and reliable connection with electrical conductors, with a maximum conductor cross-section of 2.5 mm² being sufficient for most installations. The switching function is not dependent on an external power supply, but operates purely mechanically-electrically.

Compatibility and Accessories

The key switch is designed for profile half-cylinders with a total length of approximately 40 mm, complying with standard DIN 18252. Compatible cylinders include, for example, items 28 and 28G1, also offered by JUNG. These cylinders come with three keys and enable secure access control. The combination of switch and cylinder allows controlled operation, ensuring that only persons with the correct key can activate the switch function. The mentioned cylinders are available as accessories and can be directly connected to switch 106.28.

Mounting and Installation

Mounting is carried out in the usual manner into a suitable switch box, with electrical connections made via the screw terminals. The mechanical connection to the profile half-cylinder is achieved by inserting the cylinder into the designated slot of the switch. The cover can only be removed when the cylinder is in the unlocked position, ensuring that no electrical contacts are exposed during disassembly. Installation does not require special tools, although proper wiring according to applicable regulations is mandatory.

Advantages in Operation

The switch provides a clear separation between mechanical and electrical functions, ensuring that operation is only possible for authorized persons. The use of screw terminals ensures a stable and long-lasting connection, which remains reliable even with frequent operation. Compatibility with standardized profile half-cylinders according to DIN 18252 enables easy integration into existing systems. The universal off-changeover switch function allows flexible application in various installation scenarios, without requiring additional switches.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/242796
qrcode für JUNG 106.28 Key Switch 2P 16A