| Technical data |
| Technology | LC fibre optic LWL |
| GBIC application site | Standard |
| Mode | Multimode SX |
| SFP | SFP |
| Distance | 550m |
| GBIC compatibility | H3C coded |
| Speed Mini-GBIC | 1000Gbit |
The article JD118B-CO is an SFP transceiver module, specifically designed for use in network switches from the brand 3Com as well as compatible devices from HP and H3C. It serves as an optical interface for fiber optic cables and enables data transmission over multimode fiber (optical waveguide) with a wavelength of 850 nm. The module is designed for use in commercial environments, with an operating temperature range from 0 °C to +70 °C. It features an LC socket, intended for connection with standard fiber optic cables with a 50/125 µm core diameter.
SFP transceivers are small form factor modules used in network devices such as switches or routers to establish optical connections. The JD118B-CO module is designed as a
Mini-GBIC (Gigabit Interface Converter) and supports a data transmission rate of
1000 Gbit/s (i.e., 1 Gbit/s). It is intended for use in
multimode SX applications, enabling a maximum reach of
550 meters. The use of multimode fiber is typical for short to medium distances in local networks, such as those found in offices, data centers, or industrial environments.
Technology explained simply
The module uses
SFP transceiver technology, which enables both data transmission and power supply (via the device) over a single network cable. The
LC socket is a standardized connector for fiber optic cables, ensuring a secure and precise connection. The wavelength of
850 nm is typical for multimode fiber and allows for high data rates over the specified distance. The
DDM function (Digital Diagnostic Monitoring) enables monitoring of operational parameters such as temperature, voltage, transmit power, and receive level, simplifying network maintenance and fault diagnosis.
Compatibility and accessories
The module is specifically developed for 3Com switches and is designated as
H3C-coded, meaning it is compatible with H3C devices that also use the H3C code structure. It is designed for use in standard GBIC slots, allowing direct installation into corresponding switch models. Compatibility with HP devices (formerly 3Com) is also indicated, suggesting broad usability within existing network infrastructures.
Applications
The module is intended for use in
commercial networks, particularly in environments where a stable and fast connection via fiber optic cables is required. The maximum reach of 550 meters makes it suitable for building interconnections, campus networks, or connections between server racks in data centers. The operating temperature range of 0 to +70 °C ensures reliable performance in indoor environments under normal operating conditions.
Installation and mounting
Installation is performed by simply inserting the module into the corresponding SFP slot of the switch. The LC socket is directly connected to a multimode fiber optic cable (50/125 µm). No additional tools or configurations are required, as the module is plug-and-play. The DDM function can be queried via the switch’s network management software to monitor operational status.
Advantages in operation
Using the JD118B-CO module enables a cost-effective and reliable fiber optic connection within local networks. The DDM function supports network administration in the early detection of performance degradation or errors. Compatibility with 3Com and HP switches as well as H3C devices increases flexibility in device selection and integration. The maximum reach of 550 meters provides sufficient range for many typical application scenarios without requiring additional amplifiers or converters.