IEEE 802.3bt PoE Switch 5-Port - Unmanaged Desktop Gigabit PoE++ Switch with 10/100/1000 Mbit/s Uplink
The 5-port PoE++ switch with 4 Gigabit Ethernet ports and an RJ45 Gigabit uplink port from Intellinet Network Solutions is the extra-powerful choice for small businesses. Four 10/100/1000BASE-T 4PPoE (PoE++) ports deliver up to 90 watts to even the most power-hungry devices such as thin clients, POS systems or motorized PTZ speed dome cameras. Each connected Power over Ethernet-compliant end device does not require an additional power supply, eliminating the time and expense of separate cabling. This significantly reduces the clutter of power supplies on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to the short circuit, overload and overvoltage protection functions, your devices are fully protected.
Gigabit uplink
This PoE switch is equipped with a Gigabit RJ45 port, ideal for connecting to your backbone, server or video recording solution (NVR). The resulting PoE switch network can conveniently meet your power and data needs in an immediate area while providing the necessary connection to a central network.
Wall mounting option
For more installation flexibility, you can mount this unmanaged PoE switch on the wall using the four integrated holes. Four rubber feet ensure a non-slip stand in desktop applications.
- Power and data connection for up to four PoE network devices
- One RJ45 Gigabit uplink port
- PoE power budget 140 watts
- Four Power over Ethernet ports with output power up to 90 watts per port
- 10 Gbit/s switching capacity
- 10/100/1000 auto-sensing ports automatically detect the optimal network speed
- Compatible with IEEE 802.3bt/at/af compliant Powered Devices (PD) such as network cameras, WLAN access points, VoIP phones and more
- Supports IEEE 802.3bt/at/af detection as well as protection against short circuits, overloads and overvoltage
- Saves time and installation costs by transmitting data and power over the existing network cables
- Supports two PoE++ modes, selectable by switch: IEEE 802.3bt and UPoE
- Auto-MDI-X and NWay auto-negotiation on all RJ45 ports
- Supports jumbo frames up to 9216 bytes
- Store-and-forward architecture
- Supports 802.3x flow control for full duplex and backpressure for half duplex
- Supports 2,000 MAC addresses with auto-learning and auto-aging
- 1 Mbit buffer
- Grounding point to protect against external electrical spikes
- Port surge protection up to 4 kV
- ESD protection up to 8 kV (air) and 6 kV (contact)
- Integrated wall mounting holes
- Rubber feet for non-slip use in desktop applications
- Fan-free design for quiet operation
- Fully NDAA compliant
- 3 year warranty Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
- IEEE 802.3af (Power over Ethernet 802.3at Type 1)
- IEEE 802.3at (Power over Ethernet 802.3at Type 2)
- IEEE 802.3bt (PoE++/4PPoE/Ultra Power over Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3x (Flow control for full duplex mode)
General
- Supported media:
- 10Base-T Cat5e UTP/STP RJ45, 8-pin
- 100Base-TX Cat5e UTP/STP RJ45, 8-pin
- 1000Base-T Cat5e UTP/STP RJ45, 8-pin
- MAC address entries: 2000
- Buffer: 1 Mbit
- Forwarding rate: 7.44 Mpps
- Switching capacity: 10 Gbit/s
- Store-and-forward architecture
- MTBF: >50,000 hours
- Certificates: FCC, CE, RoHS, UKCA, NDAA
Switch to select the PoE standard of the connected PD (Power Device):
- 802.3bt (for fully compliant 802.3bt/at/af PDs)
- UPoE (for PDs that support the maximum power of a PSE over four wire pairs, regardless of the PD class, including Cisco Universal Power over Ethernet)
LEDs
- Power supply
- Link/Activity
- PoE
Pin assignment RJ45 output ports
- Pin 1: DC (-)
- Pin 2: DC (-)
- Pin 3: DC (+)
- Pin 4: DC (+)
- Pin 5: DC (+)
- Pin 6: DC (+)
- Pin 7: DC (-)
- Pin 8: DC (-)
Power supply
- External power supply included:
- Input: 100.0 - 240.0 V AC, 50 - 60 Hz
- Output: DC, 55.0 V, 2.8 A
- PoE power budget: 140.0 watts (max.)
- Power consumption: 150.0 watts (max.)
Physical data
- Metal housing
- Dimensions (L x W x H): 94 x 168 x 32 mm
- Net weight: 395 g
- Gross weight: 1.45 kg
- Ambient operating temperature: 0 - 40°C
- Ambient storage temperature: -40 - 70°C
- Operating humidity: 10 - 90% RH, non-condensing
- Storage humidity: 5 - 90% RH, non-condensing
Scope of delivery
- 5-port PoE++ switch with 4 Gigabit Ethernet ports and 1 RJ45 Gigabit uplink port
- Power adapter
- Power cable -
Quick start guide
- Four rubber feet Color: Black Product dimensions: 94 (L) x 168 (W) x 32 (H) [mm]