Next-Gen 10 Gbit/s 95 W 4PPoE Injector - Supports 10/100/1000/2500/5000/10,000 Mbit/s and Power over Ethernet 802.3bt
The 10G PoE++ injector from Intellinet Network Solutions supplies your IEEE 802.3bt/af/at network end devices such as WLAN access points, IP phones or network cameras with power and data up to 100 m away from a non-PoE-capable LAN. Switch. It offers an output power of up to 95 watts, more than enough even for extremely power-hungry PoE++ devices such as motorized PTZ cameras, thin clients, point-of-sale systems, lighting controls and digital signage applications.< >
Full backwards compatibility with existing IEEE 802.3af/at PoE devices
This 10 Gigabit 4PPoE injector features auto-sensing Technology that always delivers the right wattage for the device, whether it is PoE (up to 15.4W), PoE+ (up to 30W) or PoE++ (up to 95W).< p>
Less cabling costs
As mentioned at the beginning: You don't need separate power lines to supply your PD equipment (powered devices). Once you connect the injector to a LAN switch and a power outlet, you can transmit output power up to 95W and speeds up to 10Gbit/s up to 100m using a single Cat5/6/6a cable.
Secure protection for your expensive network equipment
The autosensing technology of this Ultra PoE injector also includes secure protection against short circuits, overcharging and overvoltage. There is also port surge protection up to 6 kV and ESD protection up to 8 kV.
Optional wall mounting
For maximum flexibility during installation The injector can be attached to a wall using the two mounting holes on the back.
- Power over Ethernet with output power of up to 95 watts

• Ultra-fast 10GBASE-T RJ45 Ethernet ports, IEEE 802.3bz compliant
• Compatible with IEEE 802.3bt/at/af compliant Powered Devices (PD) such as network cameras, WLAN access points, VoIP phones and more
• Range up to 100 m
• Internal power supply
• Automatic PoE detection only transmits power to IEEE 802.3bt/at/af devices, non-PoE-capable devices only receive data
• protection against overvoltage,Overcharge and surges
• Ground point to protect against external electrical surges
• Port surge protection up to 4kV
• ESD protection up to 8kV (air) and 6kV (contact)
• Integrated wall mounting holes and four rubber feet for desktop applications
• Grounding kit included
• Ideal for power-hungry IoT devices such as motorized IP cameras, thin clients, PoE lighting systems and more
• Saves time and installation costs by transferring data and power over the existing ones Network Cable
• Plug < Play Installation; No setup required
• Fully NDAA compliant
• 3 year warranty Standards
• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3at (High-Power PoE+ Power over Ethernet)
• IEEE 802.3bt (PoE++/4PPoE Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3ab (1000BASE-T Gigabit Ethernet)
• IEEE 802.3bz (2.5G/5G/10GBASE-T Ethernet)
General:

• Supported media:
• 10Base-T Cat3/4/5/5e/6/6a UTP/STP RJ45
• 100Base-TX Cat5/5e/6/6a UTP/STP RJ45
• 1000Base-T Cat5e/6/6a UTP/STP RJ45
• 2.5G/ 5GBase-T Cat5e/Cat6/6a UTP/STP RJ45
• 10GBase-T Cat6/Cat6a or higher UTP/STP RJ45
• Ports:
• 1 x RJ45 10G data input port
• 1 x RJ45 PoE power and 10G data output port
• Certificates: CE , RoHS, FCC Class A, UKCA
• PoE pins
• Pin 1: DC (-)
• Pin 2: DC (-)
• Pin 3: DC (+)
• Pin 4: DC (+)
• Pin 5: DC ( +)
• Pin 6: DC (+)
• Pin 7: DC (-)
• Pin 8: DC (-)
LEDs

• Power supply
• PoE
• PoE max
Switch for selecting the PoE standard of the connected PD (Power Device):

• 802.3bt (for fully compliant 802.3bt/at/af PDs)
• UPoE (for PDs that support the maximum power of a PSE over four wire pairs, regardless of PD class, including Cisco Universal Power over Ethernet)
• Legacy 802.3bt (for PDs that are not fully compliant with 802.3bt)
Power

• Internal power supply
• Input: 100.0 - 240.0 V AC, 50 - 60 Hz
• Output: 54.0 V DC, 1.76 A
• PoE power budget: 95.0 watts (max.)
• Power consumption: 100.0 watts (max.)
Physical details

• Plastic housing
• Dimensions (L x W x H): 172 x 100 x 40 mm
• Net weight: 500 g
• Gross weight: 877 g
• Operating ambient temperature: 0 - 40°C (32 - 104°F)
• Storage ambient temperature: -40 - 70°C
• Operating humidity: 10 - 90% RH, non-condensing
• Storage humidity: 5 - 90% RH, non-condensing
Scope of delivery

• 10G PoE++ injector
• Power cable
• Grounding kit
• Instructions Color: Black Product dimensions: 172 (L) x 100 (W) x 40 (H) [mm]