Power over Ethernet switch with 10 ports – 8 x RJ45 plus 2 x RJ45 uplinks, high-power PoE+, PD Alive
The 8-port Gigabit Ethernet PoE+ from Intellinet Network Solutions transmits data and power to PoE-compatible devices Via standard Cat5e or Cat6 network cable. Equipped with 8 Gigabit Ethernet ports, this switch supplies WLAN access points, bridges, VoIP phones and IP cameras with up to 1,000 Mbit/s as well as a PoE power budget of 120 W.
Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol and up to 30 watts of output power per port. Connected IEEE802.3af or IEEE802.3at compliant devices do not require additional power, eliminating cabling time and costs. Fewer power cables and power supplies ensure a reduced, tidy look on ceilings and walls. Any combination of PoE and non-PoE devices is supported and thanks to the protection functions against short circuit, overload and overvoltage, your devices are reliably protected. For devices that are not 802.3at/af compliant (older WiFi access points or network cameras), we recommend using a PoE/PoE+ splitter from Intellinet Network Solutions.
Eliminate Bottlenecks with 26 Gigabit Ports
The eight auto-sensing RJ45 Gigabit Ethernet ports (10/100/1000 Mbps) provide plenty of performance for your PCs, servers and other network devices. te.There are also two gigabit uplinks that increase the available total bandwidth to up to 20 Gbit/s.
Self-Healing Network with more reliability and stability - Intellinet Powered Device Monitor ( PDM)
This PoE switch has a self-healing" PoE feature called "Powered Device Monitoring". This PoE watchdog checks with a so-called "PD Alive Check all connected devices to their functionality and automatically resets devices that do not respond, such as PoE surveillance cameras, by interrupting the power supply and then switching it on again. The PDM function is particularly useful in industrial or security environments where the connected network devices are essential. An added value of the PD Alive function is the avoidance of unnecessary calls to tech support and expensive on-site visits by customer service technicians.The functional restart is often enough to bring the unresponsive device back online.
- Power and data connection for up to eight PoE network devices

• Two RJ45 Gigabit uplink ports
• PoE power budget 120 watts
• The Powered Device Monitor feature (PDM) monitors all connected PoE devices and restarts them if inactive
• IEEE 802.3at/af-compliant RJ45 PoE/PoE+ outputs
• Output power up to 32 watts per Port*
• Manual mode for increased PoE range (reduces network speed and increases PoE range to 250 m)
• Manual VLAN mode (allows ports 1 to 8 to be isolated from each other)
• 20 Gbit/s switching capacity
• Supports IEEE 802.3at and IEEE 802.3af compliant PoE devices (wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and short circuit, overload and overvoltage protection
• Saves time and installation costs through transmission of data and power via the existing network cables
• 10/100/1000 auto-sensing ports automatically detect the optimal network speed
• Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
• The energy-saving Green Ethernet technology deactivates unused ports and adjusts the Power level according to cable length
• All RJ45 ports support Auto-MDIX (Auto Uplink)
• Store-and-Forward architecture
• IEEE 802.3x Flow Control at full duplex
• Supports up to 8192 MAC address entries as well as Auto Learning and Auto Aging
• On Air circulation fan
• Fully NDAA compliant
• 3 year warranty Standards
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
• IEEE 802.3af (Power over Ethernet 802.3af Type 1)
• IEEE 802.3at ( Power over Ethernet 802.3at Type 2)
• IEEE 802.3az (Energy Efficient Ethernet EEE)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (flow control for full duplex mode)
General

• Supported media:
• 10Base-T
• 100Base- TX
• 1000Base-T
• Packet Filter/Forwarding Rate:
• 1,488,000 pps (1,000 Mbit/s)
• 148,800 pps (100 Mbit/s)
• 14,880 pps (10 Mbit/s)
• MAC address table: 8192 entries
• Buffer: 2 MB
• Backplane speed: 20 Gbit/s
• Store-and-forward architecture
• MTBF: > 50,000 hours
• Cooling
• One fan
• Pinout RJ45 output ports (data + power)
• IEEE Alternative A
• Pin 1: Vport [+]
• Pin 2: Vport [+]
• Pin 3: Vport [-]
• Pin 4: Not used
• Pin 5: Not used
• Pin 6: Vport [-]
• Pin 7: Not used
• Pin 8: Not used
• Certificates: FCC Class A, CE, RoHS
LEDs

• Power supply
• PoE
• Link/Activity/Speed
power supply

• Input: 100 to 240 V AC, 50 to 60 Hz
• Power consumption: 120 watts (max.)
Physical details

• Metal housing
• Dimensions: 150 (L) x 220 (W) x 44 (H) mm
• Weight: 1 kg
Physical details

• Operating temperature: 0 - 40°C
• Storage temperature: 40 - 70°C
• Humidity in operation: 10 - 90%, non-condensing
• Humidity in storage: 5 - 90%, non-condensing
Scope of delivery

• 8-port Gigabit Ethernet PoE+ switch with 2 RJ45 Gigabit uplink ports
• power cable
• manual
• 48,3 cm ( 19 inch ) mounting bracket
• rubber feet
This product is available in the following variants

• #561402 - Unmanaged 8-port Gigabit Ethernet PoE+ switch with self-healing network function
• #561983 - Unmanaged 16-port Gigabit Ethernet PoE+ switch with self-healing network function
• #561907 - Unmanaged 24-port Gigabit Ethernet PoE+ Switch with Self-Healing Network function Color: Black Product dimensions: 150 (L) x 220 (W) x 44 (H) [mm]