Save installation costs and time thanks to PoE
The 24-port PoE Web-Managed Desktop Gigabit Switch (560559) from Intellinet Network Solutions is an excellent solution for transmission of data and power to PoE-compatible devices via Cat5e or Cat6 network cables. Equipped with 24 Gigabit ports (all with support for 802.3at/af PoE/PoE+), this switch provides power to access points and bridges, VoIP phones, IP cameras and much more, while also providing power to access points and bridges. delivers transmission speeds of up to 1000 Mbit/s.
Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol and delivers up to up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compatible devices connected to the switch do not require additional power supply, saving significant cost and time on laying power lines and a lot of clutter of cables and adapters Exposed areas such as walls and ceilings are no longer required. Any combination of PoE and non-PoE devices is supported and your equipment is well protected thanks to protection against short circuits, overloads and surges. For devices that do not support the 802.3at/af standard (older access points or network cameras), we recommend using an Intellinet PoE/PoE+ splitter.
Gigabit speed instead of a bottleneck
Equipped with 24 auto-sensing 10/100/1000 Mbit/s RJ45 Gigabit Ethernet ports, the 24-port PoE Web-Managed Desktop Gigabit Switch (560559) offers Huge performance for computers, servers and other network devices. In addition, it has two GBIC slots (SFP) for fiber optic connections over longer distances.
Web management
In addition, this PoE switch has numerous control functions that enable you to comprehensively manage your network. It supports VLAN, port aggregation, QoS and port mirroring, includes a built-in ICMP ping and cable test tool and supports SNMP V1 as well as the popular V2c – just a few of numerous features.
The total PoE budget is 240 watts. The average power allocation per port is 9.1 watts,the maximum usage on one port is 30 watts. - Power and data connection for up to 24 PoE network devices
Saves installation costs by transmitting data and power via the existing network cables
Domotz compatible for cloud management (may require firmware upgrade)
10/100/1000 auto-sensing ports automatically detect the optimal network speed
Two GBIC module slots (SFP)
IEEE 802.3at/af compatible RJ45 PoE /PoE+ outputs
Output power up to 30 watts per port*
PoE power budget 240 watts
Supports PoE mode A (even ports) and B (odd ports)
Supports IEEE 802.3at and IEEE 802.3af compatible PoE devices (wireless Access points, VoIP phones, IP cameras)
The power-saving Green Ethernet technology deactivates unused ports and adjusts the energy level according to the cable length
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
IEEE 802.3az (Energy Efficient Ethernet EEE) can be disabled
The Powered Device Monitor feature (PDM) monitors all connected PoE devices and restarts them if inactive
Supports IEEE 802.3at/af detection as well as protection against short circuit, overload and overvoltage
All RJ45 -Ports support Auto-MDI/MDI-X and NWay Auto-Negotiation
52 Gbit/s switching capacity
Web-based configuration
Remote reboot
Supports SNMP management
VLAN (tag and port based)
Offers IEEE 802.1x port-based security
Supports link aggregation (trunking)
IGMP snooping for multicast filtering
Supports port-based bandwidth control
Supports port mirroring
Supports two types of QoS: port-based and DSCP
Broadcast storm control with multicast packet rate setting
Supports jumbo frames up to 9 Kbytes
Supports rapid Spanning Tree/Spanning Tree Protocol
Store and forward switching architecture
Full/Half Duplex
IEEE 802.3x flow control for full duplex
Supports 8K MAC address entries
512 KByte buffer
LEDs for power, link/activity and PoE
Two high-performance fans ensure perfect Cooling and air circulation
Includes 48,3 cm ( 19 inch ) mount
Fully NDAA compliant
3 year warranty Standards
IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.1p (Traffic Prioritization)
IEEE 802.1q (VLAN Tagging)
IEEE 802.1w (Rapid Spanning Tree Protocol)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
IEEE 802.3ad (Link Aggregation Control Protocol LACP)
IEEE 802.3af (Power over Ethernet 802.3at Type 1 )
IEEE 802.3at (Power over Ethernet 802.3at Type 2)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow Control, for full duplex mode)
General
Supported media:
10Base-T Cat3, 4.5 UTP/STP RJ45
100Base-TX Cat5 UTP/STP RJ45
1000Base-T Cat5e UTP/STP RJ45
Packet filtering/forwarding rate:
1,488,000 pps (1,000 Mbps)
148,800 pps (100 Mbps)
14,880 pps (10 Mbps)
MAC address table: 8k
Backplane speed: 52 Gbit/s
Switch technology: Store and Forward
Configuration options:
Port connection speed: 10 Mbit/s, 100 Mbit/s, 1000 Mbit /s or auto-negotiation
PoE on/off per port
Flow control on/off per port
VLAN
Rate limiting (ingress rate and egress rate)
Port mirroring
Port aggregation/LACP: 8 groups
Broadcast storm configuration with broadcast Rate, Multicast Rate, and Flooded Unicast Rate
IGMP Snooping
Quality of Service (QoS): port-based or DSCP
Link Layer Discovery Protocol (LLDP) - Station and Media Access Control Connectivity Discovery
Integrated VeriPHY cable diagnostic tool
Integrated ICMP Ping Client sends ping requests to other network nodes
SNMPv1/v2c (Simple Network Management Protocol)
LAN settings (IP address, gateway, etc.)
Certificates: FCC Class A, CE
LEDs
PoE
Power
Connection/Activity
Power
Input: 90 - 260 V AC, 50 - 60 Hz
Power consumption: 260 watts (max.)
Technical details
Metal housing
Dimensions: 440 (W) x 208 (L) x 44 (H) mm
Weight: 3.05 kg
Operating temperature: 0 - 40° C
Humidity: 10 - 90% RH, non-condensing
Storage temperature: -20 - 70°C
Scope of delivery:
24-port Gigabit Ethernet PoE+ web-managed switch with 2 SFP ports
power cable
Manual Color: Black Product dimensions: 208 (L) x 440 (W) x 44 (H) [mm]