The specific method used is determined by the PSE (Power Sourcing Equipment)
Signal
Network
Outer diameter
5.7mm
Max. supported PoE standard
802.3bt
Shielding
F/UTP
Height packaging
0.305m
Width packaging
0.215m
Diameter
AWG 24
Type
Cat.5e
Article length
10000.00cm
Net weight
3.117kg
Variant
CCA, PVC coating
UL
Weight & dimensions
Width
215 mm
Depth
100000 mm
Height
305 mm
Weight
3.12 kg
Efficient fixed LAN cabling with foil shielding and 100 m lengthClean fixed installation: Solid conductors make routing in conduits, patch panels, and outlets easier.
Reduced interference: Foil shielding (F/UTP) mitigates electromagnetic interference.
Practical handling: 100 m from the Pullout Box can be unwound in a controlled way.
Defined reaction to fire: Eca according to EN 50575:2014/A1:2016 for planned installations.
Note on link lengths: For > 50 m, full Cat.5e compatibility may not be achieved with CCA conductors; use copper cable (CU) for maximum performance.
The F/UTP installation cable with PVC jacket is designed for fixed installation in structured networks. The solid conductors (AWG 24/1) facilitate termination on patch panels and outlets, the foil shielding supports a lower-interference signal path. The 100 m in the Pullout Box allow demand-based dispensing right at the point of use. Due to the CCA conductor material, the note on Cat.5e performance should be observed for longer links.
It proves itself in professional IT environments, in on-site installations and service deployments as well as in existing infrastructures of companies and public institutions when structured cabling paths are efficiently expanded or renewed.
Connection: Without connectors
Length: 100 m
Category: Cat.5e
Shielding: F/UTP (foil shielding)
Conductor material: CCA
Conductor construction: 4x2x AWG 24/1
Conductor type: solid
Jacket: PVC
Color: Beige
Reaction to fire: Eca according to EN 50575:2014/A1:2016
Packaging: Pullout Box