Inline 71100I, EAN: 4043718312627

Inline 71100I

Inline 71100I

Lieske Part No. 22196262
Mfg Part No 71100I
EAN-Code 4043718312627
Manufacturer Inline
Here only 143,64 EUR
170,93 EUR incl. VAT

Further information for Inline 71100I

Features
Product colourOrange
Cable length100 m
Cable standardCat7a
Cable shieldingS/FTP (S-STP)
Jacket materialLow smoke zero halogen (LSZH)
Cable shapeRound
Conductor materialCopper
Cable fire classB2ca
AWG wire size23
Data transfer rate10000 Mbit/s
Frequency1200 MHz
Connector 1No
Connector 2No
Connector 1 genderNo
Connector 2 genderNo
Operational conditions
Operating temperature (T-T)-20 - 60 °C
Storage temperature (T-T)-20 - 50 °C
Other features
Dimensions (WxDxH)8 x 100000 x 8 mm
Packaging data
Package width210 mm
Package depth330 mm
Package height330 mm
Package weight7.41 kg
Package volume22900 cm³
Package typeReel
Technical data
VariantCU, halogen-free
Height packaging0.330m
Max. supported PoE standard802.3bt
TypeCat.7A
Side AWithout plug
Article length10000.00cm
Operation temperature-20 to +60°C
Packaging volume0.0229m³
Article width0.80cm
Data transmission rate10Gb/s
Storage temperature-20 to +50°C
Net weight6.182kg
ColourOrange
Outer diameter7.8mm
Max. supported power90W
DesignRound cable
Side BWithout plug
Weight7.410kg
Max. supported data transfer rate10Gb/s
ShieldingS/FTP (PiMf)
NVP value73%
Length packaging0.330m
Width packaging0.210m
Length100m
Article height0.80cm
DiameterAWG 23
Wire pairs used for power transmissionThe specific method used is determined by the PSE (Power Sourcing Equipment)
SignalNetwork
PoE/PoE+/PoE++Yes
ULNo
Weight & dimensions
Width8 mm
Depth100000 mm
Height8 mm
Outer diameter7.8 mm
Weight6.18 kg
The installation cable is delivered in a drum box for easy removal of the required length. The packaging consists of a plastic reel on which the data cable is rolled up. This roll is fixed in a reinforced cardboard box, which ensures simple and tangle-free unrolling. The reel box offers the following advantages:Cost reduction through easy handling on the construction site without additional unwinding device
Handy and stackable packaging, convenient to transport in the construction site vehicle
Low weight (can also be sent by parcel service)
Avoidance of soiling and transport damage to the cable through repackaging by means of cardboard
Reduction of cutting costs for small quantities
Technical data: Cable for installation
Cat. 7a installation cable up to 1200MHz
Construction: 4x2xAWG23/1 PIMF (0.58mm²)
Suitable up to 10 Gbit
Full copper cores
Impedance: 100Ohm, DC resistance: max. 93.8 Ohm/km
Sheath halogen-free LSZH
Sheath colour orange
Construction: In pairs in metal foil
Overall braided shielding
Cable diameter approx. 7.8mm
Installation temperature: 0 - 50°C, Operating temperature: -20°C - 60°C, Storage temperature: -20°C - 50°C
With remaining metre indication on cable
Fire behaviour B2ca according to EN 50575: 2014 / A1:2016
Note: The drum box is only available for the bundles 50m, 100m, 300m, whereas 500m is delivered on a drum, the lengths 10m and 25m are delivered in a box.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/22196262
qrcode für Inline 71100I