Further information for Inline 70100I installation cable Cat.7a S/FTP 4x2x0.58 AWG23 1200MHz LSZH 100m
Features
Product colour
Orange
Cable length
100 m
Cable standard
Cat7a
Cable shielding
S/FTP (S-STP)
Jacket material
Low smoke zero halogen (LSZH)
Conductor material
Copper
Ethernet interface type
10 Gigabit Ethernet
AWG wire size
23
Data transfer rate
10000 Mbit/s
Frequency
1200 MHz
Connector 1
Connector 2
Connector 1 gender
Connector 2 gender
Operational conditions
Operating temperature (T-T)
-20 - 60 °C
Storage temperature (T-T)
0 - 50 °C
Packaging content
Quantity per pack
1 pc(s)
Packaging data
Package width
210 mm
Package depth
330 mm
Package height
335 mm
Package weight
6.96 kg
Package volume
23200 cm³
Sustainability
Doesn't contain
Halogen
Technical data
Colour
Orange
Side A
Without plug
Max. supported PoE standard
802.3bt
Length
100m
Packing
Retail
Wire pairs used for power transmission
The specific method used is determined by the PSE (Power Sourcing Equipment)
Article length
10000.0cm
Variant
CU, halogen-free
Type
Cat.7A
Max. supported power
90W
Weight
6.958kg
Height packaging
0.335m
Width packaging
0.210m
Diameter
AWG 23
Length packaging
0.330m
Signal
Network
Outer diameter
8.2mm
Side B
Without plug
Shielding
S/FTP (PiMf)
Max. supported data transfer rate
10Gb/s
Data transmission rate
10Gb/s
NVP value
76%
Packaging volume
0.0232m³
Net weight
6.388kg
Operation temperature
-20 to +60°C
PoE/PoE+/PoE++
UL
Weight & dimensions
Depth
100000 mm
Weight
6.39 kg
The installation cable is supplied in 50 m, 100 m and 300 m reels in a drum box for easy removal of the required length. The 500 m pack, on the other hand, is supplied on a drum. In the drum box, the data cable is wound onto a plastic reel. This reel is secured inside a reinforced cardboard box. This allows for easy, tangle-free unwinding. The drum box offers the following advantages:
Cost reduction thanks to easy handling on site without the need for an additional unwinding device
Handy and stackable packaging, convenient to transport in a site vehicle
Low weight (can also be sent via parcel service)Prevents soiling and transport damage to the cable thanks to the cardboard outer packaging
Reduces cutting costs for small quantities
Technical data:
Cable for installation
Cat. 7a installation cable up to 1200 MHz
Construction: 4x2xAWG23/1 PIMF (0.58 mm² )
Suitable for up to 10 Gbit
Solid copper conductors
Impedance: 100 Ohms, DC resistance: max. 87 Ohms/km
Halogen-free LSZH sheath
Sheath colour: orange
Construction: Paired in metal foil
Overall braided shield
Cable diameter approx. 8.2 mm
Installation temperature: 0 – 50 °C, operating temperature: -20 °C – 60 ° C
With remaining length indicated on the cable
Fire behaviour: Eca in accordance with EN 50575:2014 / A1:2016