Inline 33307F, EAN: 4043718353170

Inline 33307F

Inline 33307F

Lieske Part No. 22194708
Mfg Part No 33307F
EAN-Code 4043718353170
Manufacturer Inline
Here only 12,15 EUR
14,46 EUR incl. VAT

Further information for Inline 33307F

Logistics data
Country of originChina
Operational conditions
Operating temperature (T-T)-15 - 70 °C
Operating relative humidity (H-H)5 - 95%
Packaging content
Package typePolybag
Power
Output voltage5 V
Software
Windows operating systems supportedWindows 7, Windows 8, Windows 8.1, Windows 11, Windows 10, Windows XP
Mac operating systems supportedMacOS
Mac compatibilityYes
Technical data
Side BUSB-A male
Article width2.20cm
Width packaging0.100m
VariantSupports serial port
Article height1.10cm
Length packaging0.165m
Supported OSWindows, Mac OS, Linux, Android
Net weight0.014kg
Article length7.80cm
Packaging volume0.0002m³
Side ATTL 5V female
Height packaging0.011m
Weight0.029kg
Technical details
Host interfaceUSB 2.0
Output interfaceTTL
Connector 1USB Type-A
Connector 2Terminal block
Connector genderMale/Female
Baud rate3000 Kbit/s
Product colourBlack
ChipsetFTDI FT232RNL
Package volume200 cm³
Weight & dimensions
Width22 mm
Depth78 mm
Height11 mm
Weight14 g
Package width100 mm
Package depth165 mm
Package height11 mm
Package weight29 g
Dimensions (WxDxH)22 x 78 x 11 mm
USB to 5 V TTL Converter for serial UART communication with FTDI chipsetReliable data transmission: The FTDI FT232RNL chipset enables stable USB to TTL communication via a virtual COM port. Ideal for configuration, diagnostics and development with 5 V TTL/UART interfaces. The fixed level conversion ensures a direct connection to compatible devices. The integrated status indicators for operation, transmission and reception make it easy to monitor data communication.
Easy installation: The USB-to-TTL Converter connects via USB-A and is linked to GND, TXD, RXD and +5 V via a 4-pin screw terminal. This ensures quick and secure wiring. No additional power supply is required for the Converter itself, and the connection can be easily integrated into existing systems.
High operational reliability: USB protection with a 200 mA PTC fuse and ESD protection, as well as protective diodes on the TXD and RXD lines, help to protect connected devices. The resettable PTC fuse on the +5 V output further enhances operational reliability and ensures reliable performance in day-to-day use.
Versatile: Supports baud rates from 300 b/s to 3 Mbit/s and is suitable for numerous applications involving serial TTL/UART communication. The Converter can be used for configuration, firmware updates, diagnostics, troubleshooting and data transfer with compatible devices, and supports Windows, Linux, macOS and Android.
Convenient power supply: The +5 V output is supplied directly via the USB power supply and can power compatible microcontrollers or low-current peripheral devices. This reduces the need for cabling and allows small circuits to be conveniently operated via a single USB connection.
The InLine USB to TTL 5 V Converter connects computers with a USB-A port to devices that use a serial TTL/UART interface. The integrated FTDI FT232RNL chipset enables stable communication via a virtual COM port and supports baud rates from 300 b/s to 3 Mbit/s.
Product type: USB to TTL 5 V Converter
Chipset: FTDI FT232RNL
Host connector: USB-A
Device connector: TTL/UART screw terminal
Pin assignment: GND, A, B, +5 V (ground, TXD, RXD, power supply)
TTL logic level: 5 V fixed
Baud rate: 300 b/s to 3 Mbit/s
A connector: TXD output (Converter → target device)
B connector: RXD input (target device → Converter)
+5 V output: USB-powered 5 V output for devices with low current consumption
Maximum USB cable length: up to approx. 5 m
USB protection: 200 mA PTC fuse, ESD protection
TTL protection: protective diodes on TXD and RXD lines
+5 V protection: resettable PTC fuse
Status indicators: PWR, TXD, RXD (power, transmit, receive)
Supported operating systems: Windows XP, Windows 7, Windows 8, Windows 8.1, Windows 10, Windows 11, Linux, macOS, Android
Operating temperature: -40 °C to +85 °C
Humidity: 5% to 95% RH, non-condensing
Note: The +5 V output is supplied directly from the USB power supply and is suitable for powering microcontrollers or peripherals with low current consumption.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/22194708
qrcode für Inline 33307F