Inline 32308H, EAN: 4043718276028

Inline 32308H PoE+ Gigabit Injector Hub 8 Port 19" 1HE fanless

Networks > Hub / Repeater

Inline 32308H PoE+ Gigabit Injector Hub 8 Port 19" 1HE fanless

Lieske Part No. 1452974
Mfg Part No 32308H
EAN-Code 4043718276028
Manufacturer Inline
Here only 118,22 EUR
140,68 EUR incl. VAT

Further information for Inline 32308H PoE+ Gigabit Injector Hub 8 Port 19" 1HE fanless

Features
Product colourBlack
LED indicatorsPoE, Power
Rack mountingYes
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Power over Ethernet (PoE)Yes
Auto MDI/MDI-XYes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 95%
Storage temperature (T-T)-20 - 70 °C
Storage relative humidity (H-H)20 - 95%
Packaging content
Number of products included1 pc(s)
AC adapter includedYes
ManualYes
Packaging data
Package width237 mm
Package depth370 mm
Package height85 mm
Package weight2.1 kg
Package volume7500 cm³
Ports & interfaces
Ethernet LAN (RJ-45) ports8
Power
Power over Ethernet (PoE) voltage56 V
Power over Ethernet (PoE) power per port30 W
Total Power over Ethernet (PoE) budget120 W
Technical data
Length packaging0.370m
Net weight1.521kg
TypeInjector
Article height4.4cm
Weight2.104kg
Width packaging0.237m
Article width12.0cm
Height packaging0.085m
Article length18.8cm
Packaging volume0.0075m³
Number of ports8
Weight & dimensions
Size (imperial)48.3 cm (19")
Width120 mm
Depth188 mm
Height44 mm
Weight1.52 kg
Dimensions (WxDxH)120 x 188 x 44 mm
Power IP cameras and Wi-Fi access points through existing networksEasy PoE+ upgrade: The 8-port injector hub adds power over LAN cables to existing Gigabit networks. Your existing network switch remains usable.
Power matched to the application: Each of the eight PoE+ outputs delivers up to 30 W. The included supply provides up to 120 W total; the screw terminal block allows up to 240 W.
Power for IP cameras and Wi-Fi: The PoE injector supports IEEE 802.3af and IEEE 802.3at, delivering data and power to compatible IP cameras and Wi-Fi access points over the network connection.
Quiet in the 19-inch rack: The fanless metal housing operates without fan noise. Included brackets allow mounting the Gigabit PoE+ hub in a 19-inch rack with 1U height.
Protection per PoE port: Each port has overcurrent, overvoltage and overheating protection. PWR and PoE LEDs on the device indicate operating status and active PoE connections.
The InLine PoE+ Gigabit network injector hub adds Ethernet power delivery to existing network infrastructures without replacing network switches. It particularly suits retrofitting PoE-capable devices into installed networks.
When installing IP cameras or Wi-Fi access points, data and power can share the same network cable. This simplifies positioning on ceilings, walls or in technical areas without a separate power socket directly at the installation site.
The injector hub also fits neatly into network cabinets. Included brackets allow installation in a 48,3 cm ( 19 inch ) rack. Alternatively, use the included rubber feet to place it on a suitable surface.
The fanless design suits installations where additional fan noise should be avoided. With 91.4 % energy efficiency, the hub supports efficient operation.
Status indicators make it easier to check power delivery and connected PoE devices. The injector hub offers a practical way to add central PoE power to existing Gigabit networks.
DATA IN ports: 8x RJ45 10/100/1000Base-T, Auto-MDI/MDI-X
DATA + PWR OUT ports: 8x RJ45 10/100/1000Base-T, Auto-MDI/MDI-X
PoE type: Endspan
PoE output: 48-56 V DC, max. 30 W per port
Total PoE power: 120 W (240 W via screw terminal block)
Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3af, 802.3at
Voltage input: 100-240 V AC, 47-63 Hz
Output voltage/current: 56 V DC / 2.2 A
No-load power consumption: 0.16 W
Energy efficiency: 91.4 %
LED indicators: PWR, PoE (1-8)
Housing material: metal
Design: fanless, 48,3 cm ( 19 inch ) 1U
Dimensions: 188 x 120 x 44 mm
Weight: approx. 1.521 kg
Operating temperature: 0-40 °C
Storage temperature: -20-70 °C
Humidity: 20-95 %, non-condensing
1x InLine PoE+ Gigabit network injector hub, 8 ports
1x power supply
2x user manuals (German/English)
2x 48,3 cm ( 19 inch ) mounting brackets
6x screws for mounting brackets
4x rubber feet
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1452974
qrcode für Inline 32308H PoE+ Gigabit Injector Hub 8 Port 19" 1HE fanless