Features
Cable length	0.55 m
Connector 1	Molex (4-pin)
Connector 2	4 x SATA
Connector 1 gender	Male
Connector 2 gender	Male
Connector 1 form factor	Straight
Connector 2 form factor	Straight
Product colour	Multicolour
AWG wire size	20
Packaging data
Package width	90 mm
Package depth	155 mm
Package height	28 mm
Package weight	78 g
Package volume	400 cm³
Technical data
Article height	1.80cm
Packaging volume	0.0004m³
Article length	40.00cm
Length packaging	0.155m
Diameter	AWG 20
Weight	0.078kg
Side A	15pin SATA plug
Side B	5.25" plug
Variant	Angled, safety latch
Article width	2.50cm
Height packaging	0.028m
Net weight	0.046kg
Length	0.40+0.55m
Signal	Power
Colour	Multicolour
Width packaging	0.090m
UL
Weight & dimensions
Width	25 mm
Depth	400 mm
Height	18 mm
Weight	46 g

Internal SATA power Y-cable for four drives with angled connectorsPowering four SATA devices: The internal SATA power Y-cable splits a single 4-pin power connector into four angled 15-pin SATA power connectors.
Space-saving cabling: The angled SATA power connectors with tabs support optimised cable routing within compact PC and server cases.
Flexible installation: The staggered cable lengths of approx. 40 + 15 cm and 55 + 15 cm facilitate the internal cabling of multiple drives.
Continue using existing power supplies: The adapter allows multiple SATA hard drives to be connected to standard power supplies without native SATA power connectors.
Reliable power supply: The design with 8x AWG 20 strands ensures a stable power supply to connected SATA drives during system operation.
The InLine SATA Power Y-cable enables the power supply of up to four SATA devices via an existing 4-pin power connector on a standard power supply unit. The internal power adapter cable is suitable for SATA hard drives and other compatible drives with a 15-pin SATA power connector.
The four angled SATA power connectors with tabs support space-saving installation and facilitate cable management within the chassis. This makes the cable particularly suitable for systems with multiple drives or limited installation space.
The staggered cable lengths of approx. 40 + 15 cm and 55 + 15 cm allow for flexible positioning of the connected drives. The cable is suitable for hardware upgrades, system expansions or retrofitting additional SATA devices.
The integrated 8x AWG 20 strands ensure a reliable power supply to connected components and enable structured internal cabling within the system.
1x 4-pin power connector to 4x angled 15-pin SATA power connectors
Angled SATA power connectors with tab
8x AWG 20 strands
Cable lengths approx. 40 + 15 cm and 55 + 15 cm
Y-adapter design
Internal power adapter cable