Certificates
Compliance certificates	UL
Features
Product colour	White
Connector 1 gender	Male
Connector 2 gender	Female
Cable length	0.5 m
Connector 1	DC
Connector 2	5.5 x 2.1 mm
Connector 1 form factor	Angled
Connector 2 form factor	Straight
Jacket material	Polyvinyl chloride (PVC)
Number of conductors	2
Conductor cross section	AWG 18
Power
Input voltage	12–24
Technical data
Length packaging	0.140m
Article length	50.00cm
Signal	Power
Colour	White
Side A	DC male angled
Article width	2.70cm
Variant	Standard cable
Weight	0.033kg
Side B	DC female
Width packaging	0.090m
Net weight	0.030kg
Diameter	AWG 18
Packing	Retail
Packaging volume	0.0002m³
Article height	1.00cm
Shielding	Unshielded
Plug dimensions	5.5x2.1mm
Design	Angled
Height packaging	0.015m
UL
Weight & dimensions
Diameter	5 mm

Greater freedom when positioning compatible DC devicesMore flexibility in positioning: The DC extension cable bridges the gap between the power supply and the device, allowing for flexible positioning of compatible components.
Space-saving connection: The angled DC plug routes the cable away from the device connection at an angle. This makes it easier to use where there is limited space behind furniture, enclosures or covers.
Compatible barrel connector: The DC plug and DC socket measure 5.5 x 2.1 mm. The existing connection type is retained and can be extended directly and easily.
Robust cable design: The 2-core cable (AWG 18) has a PVC sheath and is suitable for the reliable extension of existing DC power connections in the 12–24 V range.
Ensure compatibility: Before purchasing, compare the connection dimensions, operating voltage, current rating and polarity with the specifications of the power supply unit and the connected device.
With this extension, you can adapt an existing DC power supply to changed spatial requirements. You can bridge the gap between the power supply unit and the connected component without having to completely reconfigure the existing connection.
The cable facilitates a tidy installation when the original cable route is too short. It is also suitable for subsequent changes to the device’s position as well as for temporary set-ups. The existing components can continue to be used.
The combination of an angled connector and a straight coupler allows the connection to be adapted to different installation scenarios. The cable does not alter either the connector size or the electrical characteristics of the existing power supply.
Connector A: DC plug, angled
Connector B: DC socket, straight
Connector dimensions: 5.5 x 2.1 mm
Conductor cross-section: AWG 18
Cable construction: 2-core
Cable sheath: PVC
Outer cable diameter: 5.0 ± 0.2 mm
Contact housing: Nickel-plated
Operating voltage: 12–24 V (DC)
Maximum power: 140 W