Features
Connector angle	90°
DC input voltage	12 V
Current rating	2 A
Product colour	White
Maximum power	24 W
Housing material	Polyvinyl chloride (PVC), Nickel
Packaging data
Package width	70 mm
Package depth	125 mm
Package height	10 mm
Package weight	8 g
Ports & interfaces
USB charging port
Technical data
Width packaging	0.070m
Side B	5.5 x 2.5 mm DC hollow socket
Height packaging	0.010m
Length packaging	0.125m
Article width	2.40cm
Packaging volume	0.0001m³
Article length	3.00cm
Colour	White
Net weight	0.005kg
Signal	Power
Type	Angled
Article height	1.00cm
Weight	0.008kg
Side A	5.5 x 2.5 mm DC hollow plug
Technical details
Package volume	100 cm³
Weight & dimensions
Width	24 mm
Depth	30 mm
Height	10 mm
Weight	5 g

Angled DC adapter for space-saving and tidy cable managementSpace-saving cable management: The angled DC adapter directs the connected cable to the side, reducing the space required directly in front of the device connection.
Compatible connector size: The adapter connects a 5.5 x 2.5 mm DC male plug to a DC female socket of the same size, allowing an existing power connection to be extended without replacing the cable.
For tight installation spaces: The 90° design facilitates cable routing behind devices, close to walls or within compact enclosures where a straight plug would protrude too far.
Clearly defined electrical limits: The passive DC plug adapter is rated for 12 V, a maximum of 2 A and up to 24 W. It does not alter either the voltage or the current of the connection.
Easy to retrofit: Insert the barrel plug adapter between a compatible power supply and the device connection to specifically adjust the existing connection direction without the need for modification.
For devices positioned close to a wall or within a compact enclosure, a straight power connection can take up an unnecessary amount of space. The angle adapter changes the direction in which the existing connection exits. This allows the connected cable to be routed to the side of the device or along the surface of the housing.
The existing power supply is retained even when retrofitting. The adapter is inserted between the power supply and the device connector. It is therefore suitable for installations, test set-ups and equipment racks where the existing connection direction does not suit the spatial layout.
Before use, the connection dimensions and electrical ratings of the existing connection must match. The adapter operates passively and does not convert the supply voltage.
Connection 1: DC male plug
Connection 2: DC female socket
Operating voltage: 12 V
Maximum operating current: 2 A
Maximum power: 24 W
Housing material: PVC
Metal sleeves: Nickel-plated