Features
Cable length	0.5 m
Connector 1	TAE-F
Connector 2	RJ45
Connector 1 gender	Male
Connector 2 gender	Male
Product colour	Black
Packaging data
Weight	12 g
Package width	95 mm
Package depth	135 mm
Package height	13 mm
Package weight	15 g
Package volume	200 cm³
Technical data
Side B	TAE-F plug
Article length	50.00cm
Packaging volume	0.0002m³
Outer diameter	4.8x2.4mm
Height packaging	0.013m
Length packaging	0.135m
Side A	RJ45 plug
Width packaging	0.095m
Weight	0.015kg
Assignment	8P2C
Net weight	0.012kg
Colour	Black
UL
Technical details
Connector type	8P2C

DSL connection cable with TAE-F plug to RJ45 for direct router connection Direct DSL connection: Connect the TAE-F connector directly to the RJ45 port of a suitable DSL router. The cable is suitable for complete DSL connections without a splitter.
Defined pinout: The connection from TAE to RJ45 is made via pin assignments 1-4 and 2-5. The RJ45 plug is configured as 8P2C, enabling a clear assignment of the pins.
Space-saving flat cable: The 2-core unshielded DSL cable has an outer diameter of 4.8 x 2.4 mm. The flat design facilitates space-saving cable routing during installation.
Direct connection instead of an additional adapter: TAE-F and RJ45 connectors are already integrated into the connection cable. This allows you to connect compatible ports directly using a DSL connection cable.
Unambiguously matching connectors: Side A has an RJ45 connector and side B has a TAE-F connector. This makes it easy to select the correct router cable based on the required connector.
The InLine DSL cable establishes a direct connection between a TAE-F socket and the RJ45 socket of a compatible DSL router. It is suitable for complete DSL connections without a splitter. The TAE-F plug and RJ45 plug are already permanently attached to the connection cable. An additional adapter for this connection is therefore not required.
The 2-core unshielded flat cable offers a compact design for cable routing. With an outer diameter of 4.8 x 2.4 mm, it can be laid even where space is limited.
The pinout from the TAE-F plug to the RJ45 plug is 1-4 and 2-5. The RJ45 plug has an 8P2C pinout. This allows you to check specifically before installation whether the connection type and pinout are compatible with your DSL router and the existing TAE-F socket.
The black DSL connection cable thus connects two clearly defined connector types and offers a straightforward solution for corresponding DSL installations without the need for a splitter.
No additional technical specifications. All relevant technical details are already included in the bullet points or in the full description.