| General |
| Cable length | 2 m |
| Operating system | MS Windows 10 |
| Software | O-Link software |
| Connection | USB connector |
| Function | Programming, testing, monitoring, control, reading event log |
| Compatibility | System 8000 alarm control panel |
The Indexa 8002T is a computer interface for the System 8000 alarm control panel, enabling direct connection of a laptop or PC to the control panel. It is primarily used for configuring, testing, and maintaining the alarm system, but also offers functions for monitoring, controlling, and reading the event log. The interface is connected to the computer via an integrated cable with a USB connector, enabling bidirectional communication between the PC and the alarm control panel. The cable length is approximately 2 meters, which is sufficient to position the computer near the control panel without the cable being too short.
Applications
The 8002T is primarily used in the installation, programming, and maintenance of alarm systems. Technicians and specialists use it to configure the control panel via a PC, for example, when assigning zones, setting user profiles, or checking system integrity. It is also useful for troubleshooting and diagnosing alarm systems, as it enables output of the event log, which records alarms, system messages, or door statuses. Thus, the interface serves as a tool for the professional commissioning and operation of System 8000 alarm systems.
Functions and Equipment in Detail
The interface features a USB connection that is directly connected to a computer. Communication takes place via the O-Link software tool, which is available for the MS Windows 10 operating system and can be downloaded. The software enables control of the control panel, display of status messages, and reading of the event log. A particular advantage is that no additional drivers need to be installed—the interface is recognized by the operating system and functions immediately after connection.
Technology Explained Simply
The 8002T operates as a serial interface connected to the computer via USB. Data transmission occurs through the integrated cable, which has a length of approximately 2 meters. Communication between the PC and the alarm control panel takes place via the O-Link protocol, specifically developed for System 8000 control panels. The software on the PC interprets the data sent by the control panel and displays it in a user-friendly format. The interface itself is passive and requires no external power supply—the power is supplied via the USB connection.
Compatibility and Accessories
The interface is specifically designed for the System 8000 alarm control panel by Indexa. Compatibility is limited to these control panels, as communication occurs via the O-Link protocol, which was specifically developed for these devices. The O-Link software is available for MS Windows 10, enabling use on standard PCs and laptops.
Installation and Mounting
Installation of the 8002T involves simply connecting the USB cable to a free USB port on the computer. The interface is directly connected to the corresponding socket on the alarm control panel. Since no driver installation is required, commissioning is straightforward.
Advantages in Operation
The 8002T provides a reliable and simple way to control and monitor the System 8000 control panel via a PC. The need to install special drivers is eliminated, speeding up setup. The event log output enables detailed analysis of system behavior, which is helpful for troubleshooting and maintenance. The cable length of approximately 2 meters provides sufficient flexibility for positioning the computer relative to the control panel. Using the O-Link software under MS Windows 10 ensures a compatible and stable environment for system control.