Magnetic-inductive flow meter, DC, connection to pipe by means of an adapter, Empty pipe detection, 2 outputs, OUT1 = analogue signal temperature, OUT2 = analogue signal flow, 4-digit alphanumeric display, Display units: l/min, m³/h, gpm, gph, °C, °F, Measuring range, 5...300 l/min (1.3...79.3 gpm), Connector, 4-digit alphanumeric display
Application: Conductive liquids, (conductivity: >= 20 µS/cm / viscosity: < 70 mm²/s at 40 °C)
Operating voltage: 18...32 V DC
Electrical design: DC
Output function: OUT1: analogue (4...20 mA scalable), OUT2: Analogue (4...20 mA scalable)
Process connection: G2 flat seal
Flow monitoring:
Measuring range: 5...300 l/min; 0.3...18 m³/h; 80...4755 gph; 1.3...79.3 gpm
Temperature monitoring:
Measuring range: -20...80 / -4...176 [°C / °F]
Pressure rating: 16 [bar]
Connection: M12 connector
Housing materials: stainless steel 316L / 1.4404; stainless steel 316Ti / 1.4571; PEI; FKM; PBT-GF 20; elastolan
Materials (wetted parts): stainless steel 316L / 1.4404; stainless steel 316Ti / 1.4571; PEEK (polyether ether ketone); Hastelloy C-4 (2.4610); Centellen; FKM
Medium temperature: -10...70 / 14...158 °C / °F
Ambient temperature: -10...60 / 14...140 °C / °F
Protection: IP 65 / IP 67
Display: Display unit: 6 x LED green (l/min, m³/h, gpm, gph, °C, °F) ; Function display: 1 x LED yellow (10³) ; Measured values: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories

Type: SM9004