Magnetic-inductive flow meter, DC PNP/NPN, connection to pipe by means of an adapter, Function programmable, Totaliser function, Empty pipe detection, 2 outputs, OUT1 = flow monitoring (binary), flow rate meter (pulse), preset meter (binary), OUT2 = flow monitoring or temperature monitoring (analogue or binary), Input for counter reset, 4-digit alphanumeric display, Measuring range, 5...300 l/min, Connector, 4-digit alphanumeric display
Application: Conductive liquids, (conductivity: >= 20 µS/cm / viscosity: < 70 mm²/s at 40 °C)
Operating voltage: 18...32 V DC
Electrical design: DC PNP/NPN
Output function: OUT1: normally open / normally closed programmable or pulse or frequency or empty pipe detection or IO-Link, OUT2: normally open / normally closed programmable or analogue (4...20 mA; 0...10 V, scalable) or empty pipe detection
Process connection: G2 flat seal
Current rating: 2 x 250 mA
Flow monitoring:
Measuring range: 5...300 l/min; 0.3...18 m³/h
Temperature monitoring:
Measuring range: -20...80 [°C]
Pressure rating: 16 [bar]
Connection: M12 connector
Housing materials: stainless steel 316L / 1.4404; stainless steel 316Ti / 1.4571; PEI; FKM; PBT-GF 20; elastolan
Materials (wetted parts): stainless steel 316L / 1.4404; stainless steel 316Ti / 1.4571; PEEK (polyether ether ketone); Hastelloy C-4 (2.4610); Centellen; FKM
Medium temperature: -10...70 °C
Ambient temperature: -10...60 °C
Protection: IP 65 / IP 67
Display: Display unit: 6 x LED green (l/min, m³/h, l, m³, 10³, °C) ; Switching status: 2 x LED yellow ; Measured values: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories

Type: SM9000