Magnetic-inductive flow meter, DC PNP/NPN, connection to pipe by means of an adapter, Function programmable, Totaliser function, 2 outputs, OUT1 = flow monitoring (binary), flow rate meter (pulse), preset meter (binary), OUT2 = flow monitoring or temperature monitoring (analogue or binary), Input for counter reset, Measuring range, 0.03...6.604 gpm, Connector, 4-digit alphanumeric display
Application: Conductive liquids, (conductivity: >= 20 µS/cm / viscosity: < 70 mm²/s at 40 °C)
Operating voltage: 19...30 V DC
Electrical design: DC PNP/NPN
Output function: OUT1: normally open / closed programmable or pulse, OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable)
Process connection: G½ flat seal
Current rating: 2 x 200 mA
Flow monitoring:
Measuring range: 0.030...6.604 gpm; 1.5...396.3 gph
Temperature monitoring:
Measuring range: -4...176 [°F]
Pressure rating: 16 [bar]
Connection: M12 connector
Housing materials: stainless steel 316L / 1.4404; PBT-GF 20; PC; FKM; TPE
Materials (wetted parts): stainless steel 316L / 1.4404; PEEK (polyether ether ketone); FKM
Medium temperature: 14...158 °F
Ambient temperature: 14...140 °F
Protection: IP 67
Display: Display unit: 6 x LED green (gpm, gph, gal, °F, 10³, 1000 x 10³) ; Switching status: 2 x LED yellow ; Measured values: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories

Type: SM6001