Accuracy / Deviations
Repeatability	1...5 cm/s
Note on repeatability	For water 5...100 cm/s; 25 °C; factory setting
Temperature drift	0.1; (for water 5...100 cm/s; 10...70 °C) cm/s x 1/K
Temperature gradient	300 K/min
Switching point accuracy	± 2...± 10; (for water 5...100 cm/s; 25 °C; factory setting) cm/s
Hysteresis	2...5; (for water 5...100 cm/s; 25 °C; factory setting) cm/s
Approvals / tests
EMC	DIN EN 60947-5-9
Shock resistance	DIN IEC 60068-2-27 / 50 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 / 20 g (55...2000 Hz)
MTTF	277 years
Displays / controls
Indication	Function / 10 x LED, 3-colour
Electrical connection
Plug connection	1 x M12; coding: A; contacts: 4
Electrical data
Operating voltage	18...36 DC V
Electricity consumption	< 60 mA
Protection class	III
Standby delay time	10 s
Reverse polarity protection
Environmental conditions
Ambient temperature	-25...80 °C
Storage temperature	-25...100 °C
Degree of protection	IP 65; IP 67
Field of application
Media	Liquid media; gaseous media
Medium temperature	-25...80 °C
Compressive strength	300 bar / 30 MPa
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38.4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Smart Sensor - SSP 0 / Generic Profiled Sensor; Function / Device identification; Function / Process data variable
Required master port class	A
Analog process data	2
Process data binary	2
Min. process cycle time	3 ms
Supported DeviceIDs	Operation mode / DeviceID; default / 53
SIO mode
Measurement / adjustment range
Rod length L	45 mm
Adjustment range	3...300 cm/s
Maximum sensitivity	3...100 cm/s
Measuring range	2...80 °C
Resolution	1 °C
Mechanical data
Housing	Cylindrical
Dimensions	Ø 50 / L = 113 mm
Materials	1.4404 (stainless steel / 316L); 1.4310 (stainless steel / 301); PC; PBT-GF20; EPDM/X
Materials in contact with the medium	1.4404 (stainless steel / 316L); O-ring: FKM 80 Shore A
Rod diameter	8,2 mm
Installation length EL	45 mm
Outputs
Total number of outputs	2
Output signal	Switching signal; IO-Link; (configurable)
Electrical version	PNP
Number of digital outputs	2
Output function	Normally open contact (NO) / Normally closed contact (NC); (configurable)
Max. voltage drop switching output DC	2,5 V
Continuous current rating of switching output DC	250 mA
Short-circuit protection type	timed
Short-circuit protection
Overload resistant
Product features
Number of inputs and outputs	Number of digital outputs: 2
Process connection	Threaded connection M18 x 1.5 internal thread
Response times
Response time	1...10 s
Software / Programming
Switching point adjustment	Push button

Flow monitor, Compact type for adapter, DC PNP, 2 switching outputs, OUT1: flow monitoring, OUT2: temperature monitoring, Connector
Application: liquids and gases
Operating voltage: 18...36 V DC
Process connection: internal thread M18 x 1.5 for adapter
Electrical design: DC PNP
Output function: 2 x normally open / closed programmable
Current rating: 2 x 250 mA
Liquids:
Medium temperature: -25...80 °C
Setting range: 3...300 cm/s
Greatest sensitivity: 3...100 cm/s
Gases:
Setting range: 200...3000 cm/s
Greatest sensitivity: 200...800 cm/s
Pressure rating: 300 [bar]
Adjustment of the switch point: pushbuttons
Connection: M12 connector
Housing materials: stainless steel 316L / 1.4404; stainless steel (301 S 22); PC (polycarbonate); PBT-GF 20; EPDM/X
Materials (wetted parts): stainless steel 316L / 1.4404; O-ring: FKM 8 x 1.5 gr 80° Shore A
Ambient temperature: -25...80 °C
Protection: IP 65 / IP 67
Accessories (to be ordered separately): Socket, Mounting accessories

Type: SI5007