Ifm Electronic PN3597, EAN: 4021179283113

ifm Electronic PN3597 pressure sensor 0...1 bar G 1/4 external

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

ifm Electronic PN3597 pressure sensor 0...1 bar G 1/4 external

Lieske Part No. 102756
Mfg Part No PN3597
EAN-Code 4021179283113
Manufacturer Ifm Electronic
Here only 445,22 EUR
529,81 EUR incl. VAT

Further information for ifm Electronic PN3597 pressure sensor 0...1 bar G 1/4 external

Accuracy / Deviations
Switching point accuracy< ± 0.5 % of span
Repeatability< ± 0.1; (with temperature variations < 10 K) % of span
Characteristic deviation< ± 0.25 (BFSL) / < ± 0.5 (LS); (BFSL = Best Fit Straight Line (minimum setting); LS = end-point setting) % of span
Hysteresis deviation< ± 0.25 % of span
Long-term stability< ± 0.05; (per 6 months) % of span
Temperature coefficient zero point< ± 0.2; (-0...80 °C) % of span / 10 K
Temperature coefficient range< ± 0.2; (-0...80 °C) % of span / 10 K
Approvals / tests
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27 / 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6 / 20 g (10...2000 Hz)
MTTF226 years
UL approvalUL certification number / J004
Printer directiveGood engineering practice; suitable for fluids of group 2; fluids of group 1 on request
Displays / controls
IndicationDisplay unit / 4 x LED, green (mbar, psi, kPa, inHg); Switching state / 1 x LED, yellow; Measured values / alphanumeric display, red / green 4-digit
Electrical connection
Plug connection1 x M12; Coding: A; Contacts: 4, gold-plated
Electrical data
Operating voltage18...30 DC; (according to SELV/PELV) V
Electricity consumption< 35 mA
Minimum insulation resistance100; (500 V DC) MΩ
Protection classIII
Standby delay time0,3 s
Reverse polarity protectionYes
Integrated watchdogYes
Environmental conditions
Ambient temperature-25...80 °C
Storage temperature-40...100 °C
Degree of protectionIP 65; IP 67
Field of application
Special featureGold-plated contacts
Measuring elementCeramic-capacitive pressure sensor cell
Applicationfor industrial use
MediaLiquid and gaseous media
Medium temperature-25...80 °C
Min. bursting pressure30000 mbar / 450 psi / 880 inHg / 3000 kPa
Compressive strength10000 mbar / 145 psi / 290 inHg / 1000 kPa
Vacuum tightness-1000 mbar / -0.1 MPa
Pressure typeGauge pressure
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38.4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
Required master port classA
Analog process data1
Process data binary1
Supported DeviceIDsOperating mode / DeviceID; Factory setting / CMPT = 2 / 433; Status_B High Resolution / CMPT = 3 / 618
NoteFurther information can be found in the IODD-PDF file under "Downloads"
ProfilesSmart Sensor - SSP 0 / Generic Profiled Sensor; Function / Device identification; Function / Process data variable; Function / Device diagnosis
Min. process cycle time2,3 ms
IO-Link pressure resolution1 mbar / 0.0001 MPa
IO-Link process data (cyclic)Function / Bit length; Pressure / 14; Binary switching information / 1
IO-Link functions (asynchronous)Application-specific marking
SIO modeYes
Measurement / adjustment range
Switching point SP10...1000 mbar / 0.1...14.5 psi / 0.2...29.5 inHg / 1...100 kPa
Reverse switch point rP5...995 mbar / 0.05...14.5 psi / 0.1...29.4 inHg / 0.5...99.5 kPa
Min. distance between SP and rP5 mbar / 0.1 psi / 0.2 inHg / 0.5 kPa
In steps of5 mbar / 0.05 psi / 0.1 inHg / 0.5 kPa
Mechanical data
Materials1.4404 (stainless steel / 316L); PBT+PC-GF30; PBT-GF20; PC
Materials in contact with the medium1.4404 (stainless steel / 316L); Al2O3 (ceramic); FKM
Min. pressure cycles100 million
Tightening moment25...35; (recommended torque; dependent on lubrication, seal and pressure load) Nm
Sealing of process connectionFKM (DIN EN ISO 1179-2)
Choke element presentno (retrofit available)
Outputs
Total number of outputs2
Output signalSwitching signal; analog signal; IO-Link; (configurable)
Electrical versionPNP
Number of digital outputs1
Output functionNormally open contact (NO) / Normally closed contact (NC); (configurable)
Max. voltage drop switching output DC2,5 V
Continuous current rating of switching output DC150; (200 (...60 °C) 250 (...40 °C)) mA
Switching frequency DC< 170 Hz
Number of analogue outputs1
Analog output current4...20 mA
Max. load500 Ω
Analog output voltage0...10 V
Minimum load resistance2000 Ω
Short-circuit protection typetimed
Short-circuit protectionYes
Overload resistantYes
Product features
Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Measuring range0...1 bar / 0...1000 mbar / 0...14.5 psi / 0...29.5 inHg / 0...100 kPa
Process connectionThreaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread: M5
Response times
Response time< 3 ms
Adjustable delay time dS, dr0...50 s
Process value damping dAP0...4 s
Attenuation analog output dAA0...4 s
Max. rise time analog output3 ms
Software / Programming
Parameterization optionsHysteresis / window; normally open contact (NO) / normally closed contact (NC); switching / reset delay; damping; display unit; current / voltage output
Electronic Pressure Switch
0-1000mbar 0 to 14.5 psi 0-100kPa item: 1 ST.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/102756
qrcode für ifm Electronic PN3597 pressure sensor 0...1 bar G 1/4 external