Accuracy / Deviations
Measurement error	± 5 % of end value
Repeatability	± 2
Resolution	5 mm
Switching point accuracy	± 1,5 K
Response dynamics T09	90 s
Approvals / tests
EMC	DIN EN 61000-6-2; DIN EN 61000-6-4
Shock resistance	DIN EN 60068-2-27 / 15 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 / 5 g (10...2000 Hz)
MTTF	224 years
Displays / controls
Indication	Display unit / 4 x LED, green (cm, inch, °C, °F); Switching state / 4 x LED, yellow (OUT4...OUT1); Measured values / alphanumeric display, 4-digit; Parameterization / alphanumeric display, 4-digit
Electrical connection
Plug connection	1 x M12; coding: A; contacts: 7
Electrical data
Operating voltage	18...30 DC V
Electricity consumption	< 50 mA
Protection class	III
Standby delay time	< 3 s
Measurement principle	Capacitive
Reverse polarity protection
Environmental conditions
Ambient temperature	0...60 °C
Storage temperature	-25...80 °C
Degree of protection	IP 67
Field of application
Media	Water-based coolant; oils; oil-based media; water; water-like media
Dielectric constant of medium	> 2
Not suitable for	highly conductive media; adhering media; granulates; bulk materials; acids; alkalis
Container pressure	0.5; (with mounting accessories: E43001 - E43007, E43019) bar / 0.05; (with mounting accessories: E43001 - E43007, E43019) MPa
Medium temperature	0...35; (with climate pipe E43100 35...65 °C) °C
Medium temperature short-term	0...90; (< 1 h) °C
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38.4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Smart Sensor - SSP 0 / Generic Profiled Sensor; Function / Device identification; Function / Process data variable; Function / Device diagnosis
Required master port class	A
Analog process data	4
Process data binary	4
Min. process cycle time	4,5 ms
Supported DeviceIDs	Operating mode / DeviceID; default / 18
SIO mode
Measurement / adjustment range
Active area A	195 mm
Inactive zone I1 / I2	53 / 16 mm
Switching point SP	25...190 mm
Reverse switch point rP	20...195 mm
In steps of	5 mm
Reference point OP	69 - 82 - 94 - 106 - 118 - 130 - 143 - 155 - 167 - 179 - 191 - 204 - OFF mm
Hysteresis OP	2 mm
Measuring range	-20...90 °C
Resolution of switching output	0,5 K
Mechanical data
Dimensions	Ø 16 mm
Materials	1.4301 (stainless steel / 304); 1.4404 (stainless steel / 316L); FKM; NBR; PBT; PC; PP; PA; TPV
Materials in contact with the medium	PP
Outputs
Total number of outputs	4
Output signal	switching signal; IO-Link
Electrical version	PNP/NPN
Number of digital outputs	4
Output function	Normally open contact (NO) / Normally closed contact (NC); (configurable)
Max. voltage drop switching output DC	2,5 V
Continuous current rating of switching output DC	200 mA
Short-circuit protection type	thermal, timed
Short-circuit protection
Overload resistant
Product features
Number of inputs and outputs	Number of digital outputs: 4
Factory setting	2 switching outputs level (OUT1, OUT2); 2 switching outputs temperature (OUT3, OUT4); mineral oils
Rod length L	264 mm
Software / Programming
Parameterization options	Hysteresis / window; Normally open contact (NO) / Normally closed contact (NC); SP/rP position; OP position; OP calibration; medium selection; offset adjustment; display unit; assignment of process values

Electronic level and, temperature sensor, DC PNP, Connector, 4-digit alphanumeric display, 2 outputs for level monitoring , (OUT1, OUT2), 2 outputs for temperature monitoring, (OUT3, OUT4), 4-digit alphanumeric display
Application: oils
Operating voltage: 18...30 V DC
Electrical design: DC PNP
Output function: 2 x normally open / closed programmable (level), 2 x normally open / closed programmable (temperature)
Current rating: 200 mA
Probe length L: 264 mm
Active range A: 195 mm
Connection: M12 connector (according to EN 61076-2-101)
Housing materials: FKM; NBR; PBT; PC; PP; TPE / V; stainless steel
Materials (wetted parts): PP (polypropylene)
Medium temperature oil: 0...70 °C
Ambient temperature: 0...60 °C
Protection: IP 67
Display: Display unit: 4 x LED green (cm, inch, °C, °F) ; Switching status: 4 x LED yellow ; Measured values: 4-digit alphanumeric display ; Programming: 4-digit alphanumeric display
Accessories (to be ordered separately): Socket, Mounting accessories

Type: LT8022