Accuracy / Deviations
Measurement error	± 5 % of end value
Repeatability	± 2
Resolution	5 mm
Approvals / tests
EMC	DIN EN 61000-6-4; DIN EN 61000-6-2
Shock resistance	DIN EN 60068-2-29 / 15 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 / 5 g (10...2000 Hz)
MTTF	227 years
Displays / controls
Indication	Display unit / 2 x LED, green (cm, inch); Switching state / 4 x LED, yellow (OUT4...OUT1); Measured values / alphanumeric display, 4-digit; Parameterization / alphanumeric display, 4-digit
Electrical connection
Plug connection	1 x M12; Coding: A; Contacts: 7, gold-plated
Electrical data
Operating voltage	18...30 DC V
Electricity consumption	< 50 mA
Protection class	III
Standby delay time	< 3 s
Measurement principle	Capacitive
Reverse polarity protection
Environmental conditions
Ambient temperature	0...60 °C
Storage temperature	-25...80 °C
Degree of protection	IP 67
Field of application
Special feature	Gold-plated contacts
Media	Water-based coolant; oils; oil-based media; water; water-like media
Dielectric constant of medium	> 2
Not suitable for	Highly conductive media; adhering media; granulates; bulk materials; acids; alkalis; hygiene and galvanizing areas
Maximum speed of level change	200 mm/s
Container pressure	0.5; (with mounting accessories: E43001 - E43007, E43019) bar / 0.05; (with mounting accessories: E43001 - E43007, E43019) MPa
Medium temperature	0...35; (with climate tube E43101: 35...60 °C) °C
Medium temperature short-term	0...90; (< 1 h) °C
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38.4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Smart Sensor - SSP 0 / Generic Profiled Sensor; Function / Device identification; Function / Process data variable; Function / Device diagnosis
Required master port class	A
Analog process data	2
Process data binary	4
Min. process cycle time	3,2 ms
Supported DeviceIDs	Operation mode / DeviceID; default / 22
SIO mode
Measurement / adjustment range
Active area A	390 mm
Inactive zone I1 / I2	60 / 22 mm
Switching point SP	35...390 mm
Reverse switch point rP	30...385 mm
In steps of	5 mm
Reference point OP	139 - 163 - 188 - 212 - 236 - 261 - 285 - 310 - 334 - 358 - 383 - 407 - OFF mm
Hysteresis OP	3 mm
Mechanical data
Dimensions	Ø 16 mm
Materials	1.4301 (stainless steel / 304); 1.4404 (stainless steel / 316L); FKM; NBR; PBT; PC; PP; PA; TPV
Materials in contact with the medium	PP
Outputs
Total number of outputs	4
Output signal	switching signal; IO-Link
Electrical version	PNP/NPN
Number of digital outputs	4
Output function	Normally open contact (NO) / Normally closed contact (NC); (configurable)
Max. voltage drop switching output DC	2,5 V
Continuous current rating of switching output DC	200 mA
Short-circuit protection type	thermal, timed
Short-circuit protection
Overload resistant
Product features
Number of inputs and outputs	Number of digital outputs: 4
Factory setting	Water-based coolant; water; water-like media
Rod length L	472 mm
Software / Programming
Parameterization options	Hysteresis / window; normally open contact (NO) / normally closed contact (NC); switching logic; SP/rP position; OP adjustment; medium selection; offset setting; switching / reset delay

Electronic level sensor, PNP/NPN, switching signal, IO-Link, rod length L 472 mm, plug connection, [cooling lubricant]: medium temperature 0...35, (with climate tube E43101: 35...60 °C) °C, [oil]: medium temperature 0...70 °C, [water]: medium temperature 0...35, (with climate tube E43101 35...60 °C) °C