Accessories
Scope of delivery	Fastening nuts: 2
Accuracy / Deviations
Correction factor	Glass: 0.4 / Water: 1 / Ceramic: 0.2 / PVC: 0.2
Hysteresis	1...15 % of Sr
Switching point drift	-15...15 % of Sr
Approvals / tests
EMC	EN 60947-5-2
MTTF	489 years
Detection range
Factory setting switching distance	15 mm
Real switching distance Sr	15 ± 10 % mm
Working distance	0...12,1 mm
Adjustable switching distance
Displays / controls
Indication	Switching state / 1 x LED, yellow
Electrical connection
Required fuse rating	Miniature fuse according to IEC60127-2 Sheet 1; ≤ 2 A; fast
Cable	2 m, PVC; 2 x 0.5 mm²
Electrical data
Operating voltage	20...250 AC/DC V
Protection class	II
Reverse polarity protected
Environmental conditions
Ambient temperature	-25...70 °C
Degree of protection	IP 65
Enhanced immunity	Yes; (Enhanced immunity (for conducted HF))
Mechanical data
Mounting type	not flush-mountable
Thread designation	M30 x 1.5
Materials	Housing, potentiometer: PBT; nut: PA; plug: TPE-E
Outputs
Max. voltage drop switching output DC	8 V
Max. voltage drop switching output AC	10 V
Minimum load current	5 mA
Max. residual current	2,5 (250 V AC) / 1,7 (110 V AC) / 1,5 (24 V DC) mA
Continuous current rating of switching output AC	200; (for UL application: 250 / 100 DC) mA
Continuous current rating of switching output DC	200; (for UL application: 250 AC / 100 DC) mA
Short-term current rating of switching output	1500; (20 ms / 0,5 Hz) mA
Switching frequency AC	25 Hz
Switching frequency DC	40 Hz
Short-circuit-proof
Overload resistant
Product features
Output function	Normally open contact
Switching distance	15 mm
Housing	Threaded design
Dimensions	M30 x 1,5 / L = 81 mm
Remarks
Remarks	Recommendation: After a short circuit, check the device for safe operation.

Capacitive sensor, Plastic thread, M30 x 1.5, AC/DC, Increased immunity to conducted radio frequency interference, Cable, Sensing range 15 mm [nf] adjustable
Operating voltage: 20...250 V AC/DC
Electrical design: AC/DC
Output function: normally open
Current rating (continuous): 200; 250 (...50 °C) mA
Current rating (peak): î: 1.5 A (20 ms / 0.5 Hz) mA
Length: 81 mm
Mounting: non-flush mountable
Sensing range: 15, adjustable mm
Switching frequency: 25 AC / 40 DC Hz
Connection: PVC cable / 2 m; 2 x 0.5 mm²
Housing materials: PBT
Ambient temperature: -25...70 °C
Protection: IP 65
Output status indication: LED yellow
Accessories (to be ordered separately): Mounting accessories

Type: KI0016