Accuracy / Deviations
Correction factor	Steel: 1 / Stainless steel: 0.7 / Brass: 0.4 / Aluminium: 0.3 / Copper: 0.2
Hysteresis	1...15 % of Sr
Switching point drift	-10...10 % of Sr
Approvals / tests
EMC	EN 61000-4-2 ESD / 4 kV CD / 8 kV AD; EN 61000-4-3 radiated HF / 10 V/m; EN 61000-4-4 burst / 2 kV; EN 61000-4-6 conducted HF / 10 V; EN 60947-5-2
MTTF	1633 years
Embedded software included
Detection range
Real switching distance Sr	20 ± 10 % mm
Working distance	0...16,2 mm
Increased switching distance
Displays / controls
Indication	Switching state / 1 x LED, yellow
Electrical connection
Terminal clamps	...2.5 mm²; cable sheath: Ø 7...13 mm; cable gland: M20 X 1.5
Electrical data
Operating voltage	10...55 DC V
Protection class	II
Reverse polarity protected
Environmental conditions
Ambient temperature	-25...80 °C
Degree of protection	IP 65
Mechanical data
Mounting type	not flush-mountable
Materials	Active surface: PPE orange; connection module: PPE black; screw: zinc-plated steel
Outputs
Max. voltage drop switching output DC	4,6 V
Minimum load current	4 mA
Max. residual current	1 mA
Continuous current rating of switching output DC	400 mA
Switching frequency DC	300 Hz
Short-circuit protection type	timed
Short-circuit protection
Overload resistant
Product features
Electrical version	PNP/NPN
Output function	Normally open contact (NO) / Normally closed contact (NC); (selectable)
Switching distance	20 mm
Housing	rectangular
Dimensions	40 x 40 x 121 mm
Remarks
Remarks	5 layers of active switching zone selectable

Inductive sensor, 40 x 40 x 120 mm, switching distance 20 mm, non-flush mountable, normally open / normally closed (selectable), DC PNP/NPN, connection terminals: ...2.5 mm², cable sheath: Ø 7...13 mm, IP 65, 2-wire, ambient temperature -25...80 °C, switching frequency 300 Hz