Accessories
Scope of delivery	Mounting nuts: 2; toothed washer: 1, stainless steel
Accuracy / Deviations
Correction factor	Steel: 1 / Stainless steel: 0.7 / Brass: 0.5 / Aluminium: 0.4 / Copper: 0.3
Hysteresis	3...15 % of Sr
Switching point drift	-10...10 % of Sr
Approvals / tests
EMC	EN 61000-4-2 ESD / 4 kV CD / 8 kV AD; EN 61000-4-3 RF radiated / 10 V/m; EN 61000-4-4 Burst / 2 kV; EN 61000-4-6 RF conducted / 10 V; EN 55011 / Class B
Vibration resistance	EN 60068-2-6 Fc / 20 g (10...3000 Hz) / 50 frequency cycles, 1 octave/minute, in 3 axes
Shock resistance	EN 60068-2-27 Ea / 100 g 11 ms half-sine; 3 shocks in each direction of the 3 coordinate axes
Continuous shock resistance	EN 60068-2-27 / 40 g 6 ms; 4000 shocks in each direction of the 3 coordinate axes
Rapid temperature change	EN 60068-2-14 Na / TA = -40 °C; TB = 85 °C; t1 = 30 min; t2 = < 10 s; 50 cycles
Salt spray test	EN 60068-2-52 Kb / severity level 5 (4 test cycles)
MTTF	1123 years
UL approval	Ta / -25...75 °C; Enclosure type / Type 1; Power supply / Limited Voltage/Current; Certification number UL / A002; File number UL / E174191
Embedded software included
Detection range
Real switching distance Sr	8 ± 10 % mm
Working distance	0...6,48 mm
Increased switching distance
Displays / controls
Indication	Switching state / 1 x LED, yellow
Electrical connection
Cable	2 m, PUR, Ø 4 mm; flammability according to ECE R118 Rev.2; 3 x 0.34 mm²
Electrical data
Operating voltage	10...30 DC V
Electricity consumption	< 10 mA
Protection class	III
Reverse polarity protection
Environmental conditions
Ambient temperature	-40...85 °C
Degree of protection	IP 65; IP 66; IP 67; IP 68; IP 69K
Field of application
Special feature	Increased switching distance
Application	Industrial applications / factory automation
Mechanical data
Mounting type	Flush-mountable
Thread designation	M18 x 1
Materials	Housing: brass white bronze-coated; active surface: PBT orange; LED window: PEI; mounting nuts: brass white bronze-coated
Tightening moment	see instruction manual Nm
Outputs
Max. voltage drop switching output DC	2,5 V
Continuous current rating of switching output DC	100 mA
Switching frequency DC	400 Hz
Short-circuit protection
Overload resistant
Product features
Electrical version	PNP
Output function	Breaker contact
Switching distance	8 mm
Housing	Threaded design
Dimensions	M18 x 1 / L = 40 mm

Induktiver Sensor, M18 x 1 / L = 40 mm, Schaltabstand 8 mm bündig einbaubar, Öffner, DC, PNP, 2 m PUR-Kabel, IP 65, IP 66, IP 67, IP 68, IP 69K, 3-Leiter, Umgebungstemperatur -40...85 °C, Schaltfrequenz 400 Hz