Ifm Electronic DN4032, EAN: 4021179273213

Ifm Electronic DN4032 - Switched mode power supply 24 DC 120 power output

Energy > Power Supply Unit

Ifm Electronic DN4032 - Switched mode power supply 24 DC 120 power output

Lieske Part No. 282137
Mfg Part No DN4032
EAN-Code 4021179273213
Manufacturer Ifm Electronic
Here only 279,97 EUR
333,16 EUR incl. VAT

Further information for Ifm Electronic DN4032 - Switched mode power supply 24 DC 120 power output

Approvals / tests
EMCEN 61000-6-1; EN 61000-6-2; EN 61000-6-3; EN 61000-6-4; EN 61000-3-2 / Class A
Vibration resistanceIEC 60068-2-6 / ±1.6 mm 2...17.8 Hz / 2 g 17.8...500 Hz
Shock resistanceIEC 60068-2-27 / 30 g 6 ms / 20 g 11 ms
MTTF132 years
Power factor correction PFCcomplies
Displays / controls
IndicationDC ok / 1 x LED
Electrical data
AC frequency47...64 Hz
Nominal voltage AC< 400 V
Input voltage range AC380...480; (-15 % / +20 %) V
DC output voltage24...28 V
Protection classI; (IEC 61140)
Over voltage protectionja; (< 32 DC)
Output voltageadjustable; output voltage according to SELV, PELV V
Max. output current at min. output voltage5 A
Max. output current at max. output voltage4,3 A
Max. output current short-term at min. output voltage6 A
Max. output current short-term at max. output voltage5,2 A
Output power (continuous)120 W
Output power (temporary)144 W
Note on output power (temporary)≤ 45 °C permanently allowed; > 45 °C < 1 minute every 10 minutes W
Power factor (rated voltage 400 V AC / 50 Hz)0,45
Note on power factor (rated voltage 400 V AC / 50 Hz)at symmetrical phase voltage
Power factor (rated voltage 480 V AC / 50 Hz)0,43
Note on power factor (rated voltage 480 V AC / 50 Hz)at symmetrical phase voltage
Power reserve20 %
Number of output circuits1
Max. ripple50 mV
Inrush current (rated voltage 400 V AC / 60 Hz)4 A
Inrush current (rated voltage 480 V AC / 50 Hz)4 A
Efficiency (rated voltage 400 V AC / 60 Hz)90,4 %
Efficiency (rated voltage 480 V AC / 50 Hz)90 %
External input fuse≥ B-6 A / ≥ C-3 A
Derating3 (60...70 °C) W/K
Power failure bridging time (nominal voltage 400 V AC / 60 Hz)27 ms
Power outage bridging time (nominal voltage 480 V AC / 50 Hz)48 ms
Input current (rated voltage 400 V AC / 60 Hz)0,75 A
Input current (rated voltage 480 V AC / 50 Hz)0,68 A
Power loss (rated voltage 400 V AC / 60 Hz)12,7 W
Power loss (rated voltage 480 V AC / 50 Hz)13,3 W
Reverse voltage withstand35 V
Inrush current limitationYes
Environmental conditions
Ambient temperature-25...70 °C
Note on ambient temperatureAllow for free spaces for convection (see operating instructions)
Storage temperature-40...85 °C
Maximum permissible relative humidity95; (IEC 60068-2-30) %
Degree of protectionIP 20; (EN 60529)
Pollution degree2; (IEC 62103: conductive pollution not permitted)
Field of application
ModelDIN rail housing
Mechanical data
Housingrectangular
Mounting methodDIN rail mounting; (TH35 (EN 60715))
Dimensions124 x 40 x 122,5 mm
Materialshousing: sheet steel
Outputs
Overload behaviourconstant output current
Short-circuit-proofYes
Overload resistantYes
Remarks
RemarksSeries connection of outputs is only valid for identical devices up to max. 150 V DC total voltage
Switched-mode power supply 24 V DC, 120 W power output, Primary switched mode, Output current 5 A, regulated
Application: regulated power supply for sensors, actuators, evaluation electronics and plcs
Nominal voltage: 2 x 400 AC V
Output voltage: 24...28 DC; adjustable; output voltage to SELV, PELV V
Output current: 5 (24 V DC) / 4.3 (28 V DC) A
Nominal frequency: 50 / 60 Hz
Efficiency: 90.4 (400 V AC; 50 Hz) / 90 (480 V AC; 60 Hz); %
Connection: screw terminals
Housing materials: steel sheet
Ambient temperature: -25...70, observe the free space for convection (see operating instructions) °C
Protection: IP 20; to EN 60529
Accessories (to be ordered separately): Mounting accessories

Type: DN4032
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/282137
qrcode für Ifm Electronic DN4032 - Switched mode power supply 24 DC 120 power output