Ifm Electronic DN4013, EAN: 4021179273190

Ifm Electronic DN4013 - Switched mode power supply 24 DC 240 power output

Industrial Material > Automation > Power supplies, transformers and power supplies

Ifm Electronic DN4013 - Switched mode power supply 24 DC 240 power output

Lieske Part No. 640620
Mfg Part No DN4013
EAN-Code 4021179273190
Manufacturer Ifm Electronic
Here only 299,66 EUR
356,60 EUR incl. VAT

Further information for Ifm Electronic DN4013 - Switched mode power supply 24 DC 240 power output

Approvals / tests
EMCEN 61000-6-1; EN 61000-6-2; EN 61000-6-4
Vibration resistanceIEC 60068-2-6 / ±1.6 mm 2...17.8 Hz / 2 g 17.8...500 Hz
Shock resistanceIEC 60068-2-27 / 30 g 6 ms / 20 g 11 ms
MTTF70 years
Displays / controls
IndicationDC ok / 1 x LED
Electrical data
AC frequency47...64 Hz
Operating voltageAutomatic voltage range switching V
Nominal voltage AC< 230 V
Rated frequency AC50...60 Hz
Input voltage range AC100...120 / 200...240; (-10 % / +10 %) V
DC output voltage24...28 V
Protection classI; (IEC 61140)
Over voltage protectionja; (< 39 DC)
Output voltageadjustable; output voltage according to SELV, PELV V
Max. output current at min. output voltage10 A
Max. output current at max. output voltage8,6 A
Max. output current short-term at min. output voltage12 A
Max. output current short-term at max. output voltage10,3 A
Output power (continuous)240 W
Output power (temporary)288 W
Note on output power (temporary)≤ 45 °C permanently allowed; > 45 °C < 1 minute every 10 minutes W
Power factor (rated voltage 120 V AC / 60 Hz)0,59
Power factor (rated voltage 230 V AC / 50 Hz)0,51
Power reserve20 %
Number of output circuits1
Max. ripple50 mV
Inrush current (rated voltage 120 V AC / 60 Hz)3 A
Inrush current at rated voltage 230 V AC / 50 Hz3 A
Efficiency (rated voltage 120 V AC / 60 Hz)91 %
Efficiency (rated voltage 230 V AC / 50 Hz)91,6 %
External input fuse≥ B-10 A / ≥ C-6 A
Derating6 (60...70 °C) W/K
Power failure bridging time (nominal voltage 120 V AC / 60 Hz)46 ms
Power failure bridging time (rated voltage 230 V AC / 50 Hz)47 ms
Input current (rated voltage 120 V AC / 60 Hz)3,73 A
Input current (rated voltage 230 V AC / 50 Hz)2,23 A
Power loss (rated voltage 120 V AC / 60 Hz)23,7 W
Power loss (rated voltage 230 V AC / 50 Hz)22 W
Reverse voltage withstand35 V
Inrush current limitationYes
Environmental conditions
Ambient temperature-25...70 °C
Note on ambient temperatureAllow for free spaces for convection (see operating instructions)
Storage temperature-40...85 °C
Maximum permissible relative humidity95; (IEC 60068-2-30) %
Degree of protectionIP 20; (EN 60529)
Pollution degree2; (IEC 62103: conductive pollution not permitted)
Overheating protectionYes
Field of application
ModelDIN rail housing
Mechanical data
Housingrectangular
Mounting methodDIN rail mounting; (TH35 (EN 60715))
Dimensions124 x 62 x 122,5 mm
Materialshousing: sheet steel
Outputs
Overload behaviourconstant output current
DC-OK signal configurationRelay output
Load capacity DC-OK signal60 V DC (0,3 A) / 30 V DC (1 A) / 30 V AC (0,5 A)
Short-circuit-proofYes
Overload resistantYes
Remarks
RemarksSeries connection of outputs is only valid for identical devices up to max. 150 V DC total voltage
Switched-mode power supply 24 V DC, 240 W power output, Primary switched mode, Output current 10 A, regulated
Application: regulated power supply for sensors, actuators, evaluation electronics and plcs
Nominal voltage: 115 / 230 AC V
Output voltage: 24...28 DC; adjustable; output voltage to SELV, PELV V
Output current: 10 (24 V DC) / 8.6 (28 V DC) A
Nominal frequency: 50 / 60 Hz
Efficiency: 91 (120 V AC; 60 Hz) / 91.6 (230 V AC; 50 Hz) %
Connection: screw terminals
Housing materials: steel sheet
Ambient temperature: -25...70, observe the free space for convection (see operating instructions) °C
Protection: IP 20; to EN 60529
Accessories (to be ordered separately): Mounting accessories

Type: DN4013
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/640620
qrcode für Ifm Electronic DN4013 - Switched mode power supply 24 DC 240 power output