Further information for Ifm Electronic DN1031 - Switched mode power supply 24 DC 60 power output
Approvals / tests
EMC
EN 61000-6-2; EN 61000-6-3
Displays / controls
Indication
DC ok / 1 x LED, green
Electrical data
Operating voltage tolerance
10 %
Nominal voltage AC
< 230 V
Rated frequency AC
47...63 Hz
Input voltage range AC
100...240 V
DC output voltage
24...28 V
Protection class
II; (IEC 61140)
Standby delay time
< 0,38 s
Output voltage
adjustable V
Max. output current at min. output voltage
2,5 A
Number of output circuits
1
Max. ripple
50 mV
Efficiency (rated voltage 230 V AC / 50 Hz)
88 %
External input fuse
10 A; B
Derating
2% / K (> 60° C) W/K
Power failure bridging time (rated voltage 230 V AC / 50 Hz)
90 ms
Environmental conditions
Ambient temperature
0...70 °C
Degree of protection
IP 20
Field of application
Model
DIN rail housing
Mechanical data
Housing
rectangular
Mounting method
DIN rail mounting; (TH35 (EN 60715); clearance for convection cooling 30 mm)
Dimensions
90 x 45 x 100 mm
Materials
Housing: PC/ABS
Outputs
Load capacity DC-OK signal
24 V DC (30 mA)
Short-circuit-proof
Overload resistant
Remarks
Remarks
Output voltage according to SELV, PELV
Switched-mode power supply 24 V DC, 60 W power output, Primary switched mode, Output current 2.5 A, regulated, DCok output
Application: regulated power supply for sensors, actuators, evaluation electronics and plcs
Nominal voltage: 115 / 230 AC V
Output voltage: 24...28 V
Output current: 2.5 A
Nominal frequency: 47...63 Hz
Efficiency: 88 (230 V AC; 24 V DC; 2.5 A) %
Connection: cage clamps
Housing materials: polycarbonate ABS
Ambient temperature: 0...70 °C
Protection: IP 20
Accessories (to be ordered separately): Mounting accessories