Accessories
Scope of delivery	Base unit
Optional accessories	Closure cap: M12, E73004
Approvals / tests
EMC	EN 50295; IEC 61000-6-2
MTTF	155 years
AS-i parameters
AS-i version	2.11; 3.0
AS-i addressing	Addressing socket
AS-i Master profile	M2; M3; M4
AS-i profile	S-7.0.E
AS-i I/O configuration	7 hex
AS-i ID code	0.E hex
Data bit assignment	Data bit / D0 / D1 / D2 / D3; Input / 1 / 2 / 3 / 4; Socket / I-1 / I-2 / I-3 / I-4; Pin / 2+4 / 2+4 / 2+4 / 2+4; Output / 1 / 2 / 3 / 4; Socket / O-1/2 / O-1/2 O2 / O-3/4 / O-3/4 O-4; Pin / 4 / 2 4 / 4 / 2 4
Extended addressing mode
Displays / controls
Indication	Operation / LED, green; Fault / LED, red; Function / LED, yellow
Electrical connection
Module connection	Flat cable
Quick mounting technology for AS-i flat cable	; Alignment possible in three directions
Electrical connection - Outputs
Plug connection	M12
Electrical data
Operating voltage	26.5...31.6 DC; ("supply class 2" according to cULus) V
Max. current draw from AS-i	250 mA
Additional power supply	15...30 DC; (AUX) V
Maximum current draw from additional supply	4000 mA
Integrated watchdog
Environmental conditions
Ambient temperature	-25...70 °C
Degree of protection	IP 67
Field of application
Model	DIN rail housing
Application	Field mounting
Inputs
Number of digital inputs	4
Input circuitry for digital inputs	PNP
Sensor supply for inputs	AS-i
Power supply	18...30; (via flat cable) V
Max. current rating inputs total	200 mA
Input current high	6...10 mA
Input current Low	0...2 mA
High switching level	> 11 V
Short-circuit resistance digital inputs
Inputs / Outputs
Number of inputs and outputs	Number of digital inputs: 4; Number of digital outputs: 4
Mechanical data
Housing	rectangular
Mounting method	AS-i flat cable directly connectable; DIN rail mounting; (TH35 (EN 60715))
Dimensions	103 x 90 x 44,2 mm
Materials	PA; Piercing contacts: CuSn6 nickel-plated and tin-plated
Outputs
Number of digital outputs	4
Circuitry	PNP
Voltage range DC	15...30; (according to PELV; via flat cable) V
Current rating per output	1000; (usage category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1)) mA
Total output current rating	4 A
Actuator supply for outputs	AUX
Short-circuit-proof
Galvanically isolated
Remarks
Remarks	Inputs and outputs must not be connected galvanically. None of the following terminals may be connected to an external potential: I-, I+, I1, I2, I3, I4. The terminals are galvanically connected to the AS-i cable.

Active ClassicLine module, AS-i flat cable connection, 4 inputs / 4 outputs, Addressing socket, Three orientations of the flat cable are possible, Sockets M12 x 1, Digital inputs and outputs
Operating voltage: 26.5...31.6 V DC
Electrical design: 4 inputs / 4 outputs
Output function: transistor PNP
Total current consumption from AS-i: < 250 mA
Circuit: DC PNP
Sensor supply: AS-i
Voltage range: 18...30 DC V
Outputs:
Housing materials: PA; Piercing contacts: CuSn6 surface nickel and tin-plated
Ambient temperature: -25...70 °C
Protection: IP 67
Operation: LED green
Function display: LED yellow
Error: LED Red
Accessories (to be ordered separately): Socket, Mounting accessories

Type: AC5209