Accessories
Scope of delivery	Base unit
Optional accessories	Cap: M12, E73004; Impact protection: E7000A
Approvals / tests
ATEX equipment marking	II 3D Ex tc IIIB T80°C Dc X IP50
EMC	EN 50295; IEC 61000-6-2
MTTF	188 years
AS-i parameters
AS-i version	2.11; 3.0
AS-i addressing	Addressing socket
AS-i Master profile	M2; M3; M4
AS-i profile	S-3.0.E
AS-i I/O configuration	3 hex
AS-i ID code	0.E hex
Data bit assignment	Data bit / D0 / D1 / D2 / D3; Input / 1 / 2 / - / -; Socket / I-1 / I-2 / - / -; Pin / 2+4 / 2+4 / - / -; Output / - / - / 3 / 4; Socket / - / - / O-3/4 / O-3/4 O-4; Pin / - / - / 4 / 2 4
Extended addressing mode
AS-i certificate applied for
Displays / controls
Indication	Operation / LED, green; Fault / LED, red; Function / LED, yellow
Electrical connection
Module connection	Flat cable
Quick mounting technology for AS-i flat cable	; Alignment possible in three directions
Electrical connection - Outputs
Plug connection	M12; coding: A; contacts: 3
Electrical data
Operating voltage	26,5...31,6 DC V
Max. current draw from AS-i	150 mA
Total current rating	4 A
Integrated watchdog
Environmental conditions
Ambient temperature	-10...50 °C
Degree of protection	IP 50
Field of application
Model	DIN rail housing
Application	AS-i ATEX module
Inputs
Number of digital inputs	2
Input circuitry for digital inputs	PNP
Sensor supply for inputs	AS-i
Power supply	18...30; (via flat cable) V
Max. current rating inputs total	100 mA
Input current high	6...10 mA
Input current Low	0...2 mA
High switching level	> 11 V
Short-circuit resistance digital inputs
Inputs / Outputs
Number of inputs and outputs	Number of digital inputs: 2; Number of digital outputs: 2
Mechanical data
Housing	rectangular
Mounting method	AS-i flat cable directly connectable; DIN rail mounting; (TH35 (EN 60715))
Dimensions	103 x 45 x 44,7 mm
Materials	PA; Piercing contacts: CuSn6 nickel-plated and tin-plated
Outputs
Number of digital outputs	2
Circuitry	PNP
Voltage range DC	15...30; (according to PELV; via flat cable) V
Current rating per output	2000; (Service category DC-13 (control of electromagnets): 40 W (IEC 60947-5-1)) mA
Short-circuit-proof
Galvanically isolated
Remarks
Remarks	A mechanical protection must be implemented.; Otherwise, the device may only be mounted together with the shock protection (E7000A).; Inputs and outputs must not be connected galvanically.; None of the following terminals may be connected to an external potential:; I-, I+, I1, I2; The terminals are galvanically connected to the AS-i cable.

Active ClassicLine module, AS-i flat cable connection, 2 inputs / 2 outputs, Addressing socket, Three orientations of the flat cable are possible, ATEX approval, Group II, category 3D, Only in conjunction with impact protection housing E7000A or equivalent protection, Digital inputs and outputs (2 A), Sockets M12 x 1
Operating voltage: 26.5...31.6 V DC
Electrical design: 2 inputs / 2 outputs
Output function: transistor PNP
Total current consumption from AS-i: < 150 mA
Circuit: DC PNP
Sensor supply: AS-i
Voltage range: 18...30 DC V
Outputs:
Housing materials: PA; Piercing contacts: CuSn6 surface nickel and tin-plated
Ambient temperature: -10...50 °C
Protection: IP 50
Operation: LED green
Function display: LED yellow
Error: LED Red
Accessories (to be ordered separately): Socket, Mounting accessories

Type: AC507A