Accessories
Scope of delivery	Base unit
Optional accessories	Cap: M12, E73004; Impact protection: E7000A
Approvals / tests
ATEX equipment marking	II 3D Ex tc IIIB T80°C Dc X IP50
EMC	EN 50295; IEC 61000-6-2
MTTF	404 years
AS-i parameters
AS-i version	2.11; 3.0
AS-i addressing	Addressing socket
AS-i Master profile	M2; M3; M4
AS-i profile	S-0.0.E
AS-i I/O configuration	0 hex
AS-i ID code	0.E hex
Data bit assignment	Data bit / D0 / D1 / D2 / D3; Input / 1 / 2 / 3 / 4; Socket / I-1 / I-2 / I-3 / I-4; Pin / 2+4 / 2+4 / 2+4 / 2+4
Extended addressing mode
AS-i certificate applied for
Displays / controls
Indication	Operation / LED, green; Fault / LED, red; Function / LED, yellow
Electrical connection
Module connection	Flat cable
Quick mounting technology for AS-i flat cable	; Alignment possible in three directions
Plug connection	4 x M12; Coding: A; Contacts: 4
Electrical data
Operating voltage	26,5...31,6 DC V
Max. current draw from AS-i	250 mA
Environmental conditions
Ambient temperature	-10...50 °C
Degree of protection	IP 50
Field of application
Model	DIN rail housing
Application	AS-i ATEX module
Inputs
Number of digital inputs	4
Input circuitry for digital inputs	PNP
Sensor supply for inputs	AS-i
Power supply	18...30; (via flat cable) V
Max. current rating inputs total	200 mA
Input current high	6...10 mA
Input current Low	0...2 mA
High switching level	> 11 V
Short-circuit resistance digital inputs
Inputs / Outputs
Number of inputs and outputs	Number of digital inputs: 4
Mechanical data
Housing	rectangular
Mounting method	AS-i flat cable directly connectable; DIN rail mounting; (TH35 (EN 60715))
Dimensions	103 x 45 x 44,7 mm
Materials	PA; Piercing contacts: CuSn6 nickel-plated and tin-plated
Remarks
Remarks	A mechanical protection must be implemented. Otherwise, the device may only be mounted together with the impact protection (E7000A). None of the following terminals may be connected to an external potential: I-, I+, I1, I2, I3, I4. The terminals are galvanically connected to the AS-i cable.

Active ClassicLine module, AS-i flat cable connection, 4 inputs, Addressing socket, Three orientations of the flat cable are possible, ATEX approval, Group II, category 3D, Only in conjunction with impact protection housing E7000A or equivalent protection, Sockets M12 x 1
Operating voltage: 26.5...31.6 V DC
Electrical design: 4 inputs
Total current consumption from AS-i: < 250 mA
Circuit: DC PNP
Sensor supply: AS-i
Voltage range: 18...30 DC V
Housing materials: PA; Piercing contacts: CuSn6 surface nickel and tin-plated
Ambient temperature: -10...50 °C
Protection: IP 50
Operation: LED green
Function display: LED yellow
Error: LED Red
Accessories (to be ordered separately): Socket, Mounting accessories

Type: AC505A