Accessories
Scope of delivery	Velcro strap; Adhesive pad
Approvals / tests
EMC	EN 50295
MTTF	220 years
AS-i parameters
AS-i version	3.0
AS-i Master profile	M4
AS-i profile	S-7.A.7
AS-i I/O configuration	7 hex
AS-i ID code	A.7 hex
AS-i certificate	102301
Extended addressing mode
Displays / controls
Indication	Operation / LED, green; Fault / LED, red; Function / LED, yellow
Electrical data
Operating voltage	18...31,6 DC V
Max. current draw from AS-i	180; (without sensors: < 30 mA; inputs and outputs active: < 180 mA) mA
Protection class	III
Total current rating	0.15; (total current for all inputs and outputs supplied from AS-i: 150 mA) A
Integrated watchdog
Environmental conditions
Ambient temperature	-25...55 °C
Degree of protection	dependent on enclosure
Field of application
Model	Only for operation with AS-i masters Profile M4
Application	For integrating mechanical switches into AS-i networks
Inputs
Number of digital inputs	4
Input circuitry for digital inputs	PNP
Sensor supply for inputs	AS-i
Power supply	18...30; (DC) V
Max. current rating inputs total	150 mA
Input current high	6...10 mA
Input current Low	0...2 mA
High switching level	> 11 V
Short-circuit resistance digital inputs
Inputs / Outputs
Number of inputs and outputs	Number of digital inputs: 4; Number of digital outputs: 4
Mechanical data
Housing	rectangular
Mounting method	Installation in surface-mounted enclosures
Dimensions	31,1 x 76,6 x 12 mm
Materials	Housing: PC encapsulated
Outputs
Electrical version	PNP
Number of digital outputs	4
Circuitry	PNP
Voltage range DC	18...30; (DC) V
Current rating per output	100; (Usage category DC-13 (control of electromagnets): 2.5 W (IEC 60947-5-1)) mA
Total output current rating	0,15 A
Short-circuit-proof
Galvanically isolated
Remarks
Remarks	A watchdog function de-energizes the outputs if no communication occurs on the AS-i line. Install the device in a touch-safe manner. Mount in an enclosure with minimum volume of 68 x 136 x 53 mm (LxWxH), e.g. Schneider Electric Harmony XALD03, XALD04. None of the following terminals may be connected to an external potential: 0-, I+, I1, I2, I3, I4. The terminals are galvanically connected to the AS-i cable. Suitable for use at altitudes up to 2000 m above sea level.

Active AS-i module, Installation in a surface-mounted housing, 4 inputs / 4 outputs, AS-i slave with extended addressing mode, Only for operation with AS-i masters with the profile M4
Operating voltage: 18...31.6 V DC
Electrical design: 4 inputs / 4 outputs
Output function: transistor PNP
Total current consumption from AS-i: < 180 mA
Circuit: DC PNP
Sensor supply: AS-i
Voltage range: 18...30 DC V
Outputs:
Connection: screw terminals
Housing materials: housing: PC potted
Ambient temperature: -25...55 °C
Protection: IP 20
Operation: LED green
Function display: LED yellow
Error: LED Red
Accessories (to be ordered separately): Mounting accessories

Type: AC2752