Approvals / tests
EMC	EN 50295
MTTF	145 years
AS-i parameters
AS-i Master profile	M3; M4
AS-i profile	S-7.3.5
AS-i I/O configuration	7 hex
AS-i ID code	3.5 hex
Displays / controls
Indication	analogue signal / LED, yellow channels AO1...AO2; operation / LED, green AS-i, AUX; fault / LED, red
Electrical connection
Module connection	Flat cable
Electrical data
Operating voltage	26,5...31,6 DC V
Max. current draw from AS-i	140 mA
Additional power supply	24...30 DC; (AUX) V
Maximum current draw from additional supply	550; (AUX) mA
Reverse polarity protection
Environmental conditions
Ambient temperature	0...70 °C
Storage temperature	-25...85 °C
Maximum permissible relative humidity	90; (non-condensing) %
Maximum height above sea level	2000 m
Degree of protection	IP 65
Field of application
Application	Field mounting
Inputs
Accuracy	0,5 %
Inputs / Outputs
Number of inputs and outputs	Number of analogue outputs: 2
Mechanical data
Housing	rectangular
Mounting method	AS-i interface to FK-E subunits
Dimensions	102 x 91 x 71 mm
Materials	Housing: PBT
Outputs
Number of analogue outputs	2; (connection of 2- or 4-wire actuators)
Analog output current	0...20 mA
Max. load	600 Ω
Analog output resolution	16 (1 bit = 1 µA)
Actuator supply for outputs	AS-i / AUX
Overload resistant

Active AS-i module IP 65, AS-i interface to FC-E lower parts, 2 outputs 0...20 mA, 2 analogue outputs 0...20 mA, AS-i profile S-7.3, For the connection of 2-wire actuators or 4-wire actuators with separate 24 V supply, Connection via cage clamps
Operating voltage: 26.5...31.6 V DC
Electrical design: 2 outputs 0...20 mA
current output: 0...20 mA
voltage output: 24 DC ± 20 % V
Connection: via contact pins to FC, FC-E or SC lower part
Housing materials: PBT
Ambient temperature: 0...70 °C
Protection: IP 65
Operation: LED green (AS-i: AS-i voltage)
Function display: LED green (power: supply A/D converter)
Error: LED red (FAULT: AS-i communication error / periphery fault)
Accessories (to be ordered separately): Mounting accessories

Type: AC2618