| Approvals / tests |
| EMC | EN 50295 |
| MTTF | 140 years |
| AS-i parameters |
| AS-i Master profile | M3; M4 |
| AS-i profile | S-7.3.D |
| AS-i I/O configuration | 7 hex |
| AS-i ID code | 3.D hex |
| Parameter bit assignment | Parameter bit / designation; P0 / filter in A/D converter / : 1 / 50 Hz / * / 0 / 60 Hz; P1 / channel / 2: 1 / projected / / 0 / not projected; P2 / peripheral fault / : 1 / activated / / 0 / deactivated; P3 / not used / : 1 / reserved / / 0 / not reserved |
| Displays / controls |
| Indication | Analog signal / LED, yellow channels AI1...AI2; operation / LED, green AS-i, AUX; fault / LED, red |
| Electrical connection |
| Module connection | Flat cable |
| Electrical data |
| Operating voltage | 26,5...31,6 DC V |
| Max. current draw from AS-i | 140 mA |
| Additional power supply | 24...30 DC; (AUX) V |
| Maximum current draw from additional supply | 550; (AUX) mA |
| Reverse polarity protection | |
| Environmental conditions |
| Ambient temperature | 0...70 °C |
| Storage temperature | -25...85 °C |
| Maximum permissible relative humidity | 90; (non-condensing) % |
| Maximum height above sea level | 2000 m |
| Degree of protection | IP 65 |
| Field of application |
| Application | Field mounting |
| Inputs |
| Sensor supply for inputs | AS-i / AUX |
| Max. current rating inputs total | 100 mA |
| Number of analogue inputs | 2; (connection of 2-, 3-, 4-wire sensors) |
| Analogue input voltage | 0...10 V |
| Resolution | 16 (1 bit = 1 mV) |
| Accuracy | 0,5 % |
| Short-circuit-proof | |
| Inputs / Outputs |
| Number of inputs and outputs | Number of analog inputs: 2 |
| Mechanical data |
| Housing | rectangular |
| Mounting method | AS-i interface to FK-E subunits |
| Dimensions | 102 x 91 x 71 mm |
| Materials | Housing: PBT |
AS-i Eingangsmodul, 102 x 91 x 71 mm, UniversalModule 2AI(V) IP65, Anschlussklemmen, IP 65