Approvals / tests
EMC	EN 50295
MTTF	150 years
AS-i parameters
AS-i Master profile	M3; M4
AS-i profile	S-7.3.D
AS-i I/O configuration	7 hex
AS-i ID code	3.D hex
Parameter bit assignment	Parameter bit / designation; P0 / filter in A/D converter / : 1 / 50 Hz / * / 0 / 60 Hz; P1 / channel / 2: 1 / projected / / 0 / not projected; P2 / peripheral fault / : 1 / activated / / 0 / deactivated; P3 / not used / : 1 / reserved / / 0 / not reserved
Displays / controls
Indication	Analog signal / LED, yellow channels AI1...AI2; operation / LED, green AS-i, AUX; fault / LED, red
Electrical connection
Module connection	Flat cable
Electrical data
Operating voltage	26,5...31,6 DC V
Max. current draw from AS-i	140 mA
Additional power supply	24...30 DC; (AUX) V
Maximum current draw from additional supply	550; (AUX) mA
Reverse polarity protection
Environmental conditions
Ambient temperature	0...70 °C
Storage temperature	-25...85 °C
Maximum permissible relative humidity	90; (non-condensing) %
Maximum height above sea level	2000 m
Degree of protection	IP 65
Field of application
Application	Field mounting
Inputs
Sensor supply for inputs	AS-i / AUX
Max. current rating inputs total	100 mA
Number of analogue inputs	2; (connection of 2-, 3-, 4-wire sensors)
Analogue input current	4...20 mA
Resolution	16 (1 bit = 1 µA)
Accuracy	0,5 %
Short-circuit-proof
Inputs / Outputs
Number of inputs and outputs	Number of analog inputs: 2
Mechanical data
Housing	rectangular
Mounting method	AS-i interface to FK-E subunits
Dimensions	102 x 91 x 71 mm
Materials	Housing: PBT

Active AS-i module IP 65, AS-i interface to FC-E lower parts, 2 inputs 4...20 mA, 2 analogue inputs, 4...20 mA, AS-i profile S-7.3, For the connection of 2-wire, 3-wire or 4-wire sensors, Connection via cage clamps
Operating voltage: 26.5...31.6 V DC
Electrical design: 2 inputs 4...20 mA
Connection: via contact pins to FC, FC-E or SC lower part
Housing materials: PBT
Ambient temperature: 0...70 °C
Protection: IP 65
Operation: LED green (AS-i: AS-i voltage)
Function display: LED green (power: supply A/D converter)
Error: LED red (FAULT: AS-i communication error / periphery fault)
Accessories (to be ordered separately): Mounting accessories

Type: AC2616