ICY-Box IB-273STU3, EAN: 4250078185628

ICY-Box IB-273STU3 Case 2.5" SATA3 black

Accessories > Drives > Installation Kits

ICY-Box IB-273STU3 Case 2.5" SATA3 black

Lieske Part No. 660743
Mfg Part No IB-273STU3
EAN-Code 4250078185628
Manufacturer ICY-Box
Here only 15,44 EUR
18,37 EUR incl. VAT

Further information for ICY-Box IB-273STU3 Case 2.5" SATA3 black

Design
Product typeHDD/SSD enclosure
Product colourBlack
MaterialAluminium, Plastic
LED indicatorsHDD, Power
On/off switchYes
Logistics data
Harmonized System (HS) code84718000
Products per master (outer) case40 pc(s)
Packaging content
Cables includedUSB
Travel pouchYes
Screwdriver includedYes
ManualYes
Performance
Data transfer rate5 Gbit/s
Country of originChina
Ports & interfaces
USB version3.2 Gen 1 (3.1 Gen 1)
USB connector genderFemale
USB ports quantity1
USB connectivityYes
Power
Power source typeUSB
Storage
Number of storage drives supported1
Storage drive size2.5"
Supported storage drive interfacesSerial ATA
Supported storage drive heights9.5 mm
Hot-swapYes
System requirements
Windows operating systems supportedYes
Linux operating systems supportedYes
Mac operating systems supportedYes
Weight & dimensions
Width80 mm
Depth130 mm
Height14 mm
Weight85 g
Package width105 mm
Package depth200 mm
Package height48 mm
Package weight193 g
The ICY-Box IB-273STU3 is an external HDD / SSD housing for 2.5-inch storage drives, serving as an installation kit for mobile and stationary data storage solutions. It enables the use of a SATA drive via a USB connection, with the connection made through USB 3.2 Gen 1 (also referred to as USB 3.1 Gen 1). The housing is designed for use with hard drives or SSDs with a maximum height of 9.5 mm, with no limitation on storage capacity. Power supply is provided via the USB connection, eliminating the need for an external power source. The housing is black and made from a combination of aluminium and plastic, ensuring good heat dissipation and low weight. Dimensions are 80 mm (width) × 130 mm (depth) × 14 mm (height), and the weight is 85 g.

Applications
This housing is suitable for use as an external data storage device, particularly in mobile scenarios where fast and reliable data backup or transfer is required. It can be connected to computers, laptops, or other devices with a USB port. Support for hot-swap allows the drive to be replaced during operation without shutting down the device. This is especially useful for backup and archiving applications where multiple drives are used sequentially. Plug-&-Play functionality simplifies setup, as no additional software installation is required.

Functions and Equipment in Detail
The housing features a USB connection (female) in version 3.2 Gen 1, enabling a maximum data transfer rate of 5 Gbit/s. The connection is backward compatible with USB 2.0 and USB 1.1, allowing use with older devices. An integrated on/off switch allows manual control of power supply. Additionally, LED indicators for operation and drive access are included, with the display implemented via a blue LED ring. This visual feedback helps identify the drive’s status. The housing is designed for use with SATA interfaces, ensuring compatibility with most modern 2.5-inch drives.

Technology Explained Simply
The USB 3.2 Gen 1 (5 Gbit/s) connection provides high transfer speeds, enabling fast access to large data volumes. Power supply via USB (PoE, Power over Ethernet) is a practical solution, as no additional power source is needed. The combination of aluminium and plastic ensures efficient heat dissipation, which can extend the drive’s lifespan. The hot-swap function allows drive replacement without restarting the system, improving workflow efficiency. Plug & Play means the device is automatically recognized upon connection, requiring no manual configuration.

Compatibility and Accessories
The housing is compatible with operating systems Windows, Mac, and Linux, ensuring broad usability. Support for hot-swap and Plug & Play enhances user-friendliness. The delivery includes the housing itself, a USB cable, a travel case for protection and transportation, a screwdriver for drive installation, and an instruction manual. These components facilitate installation and safe transportation of the device.

Installation and Mounting
Drive installation involves removing the housing cover, inserting the 2.5-inch SATA drive, and securing it with the included screws. The included screwdriver simplifies this process. After connecting the USB cable to the computer and the housing, the device is automatically recognized. The instruction manual provides guidance for correct installation and use, including the recommendation to ensure all read and write operations are completed before disconnecting the device to avoid data loss.

Operational Advantages
The ICY-Box IB-273STU3 offers a compact and lightweight solution for mobile use. The combination of aluminium and plastic ensures good heat dissipation and low weight. The hot-swap function enables quick drive replacement, increasing efficiency in backup and archiving tasks. Plug-&-Play functionality and compatibility with various operating systems reduce setup time. The integrated LED indicator provides visual feedback on operational status, simplifying device monitoring. The included travel case protects the housing during transportation and prevents scratches or damage.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660743
qrcode für ICY-Box IB-273STU3 Case 2.5" SATA3 black