HP JE107A, EAN: 1066270548801

HP JE107A switch 48xTP 100 Mbit POE

Networks > Switches > up to 48 ports

HP JE107A switch 48xTP 100 Mbit POE

Lieske Part No. 895889
Mfg Part No JE107A
EAN-Code 1066270548801
Manufacturer HP
Here only 1.908,09 EUR
2.270,63 EUR incl. VAT

Further information for HP JE107A switch 48xTP 100 Mbit POE

General
Number of ports48
Port type10BASE-T/100BASE-TX
PoE standardIEEE 802.3af
SFP ports4
Forwarding bandwidth12,8 Gbit/s
Packet processing9.5 million Packages per second
MAC addresses16.000
Stackingup to 8 switch units
Stacking technology3Com XRN®
Layer-3 functionsHardware-based routing, ECMP, static/dynamic routing, RIPv1/v2, OSPF, ASIC Layer 3 forwarding, PIM-DM, PIM-SM, IGMP v1/v2 Snooping, DHCP Relay
Layer-2 functionsIEEE 802.1Q VLANs, 802.3ad LACP, 802.3x Full-duplex flow control, 802.1D STP, 802.1w RSTP, Fast Start with BPDU protection, IGMP v1/v2 multicast filtering
QoS functionsWeighted Round Robin/Fair/Strict Priority Queuing, IEEE 802.1p Class of Service, IPv6 classification, prioritization and filtering, Ingress/Egress Rate Limiting
Safety functionsRADIUS authentication, SSHv1.5, access control lists, packet filtering, SNMP v3 encryption, IEEE 802.1X network login, VLAN auto-initiation, QoS profiling, multi-level access privileges, administrative password recovery
Management toolsWeb-based GUI, SNMP, Telnet, CLI, RMON-1, SMON, software backup/restore, Xmodem, FTP, TFTP, IP address assignment via manual/DHCP/BOOTP, network debugging tools (DHCP Tracker, UDP Helper, Traceroute, 1-1 traffic mirroring)
Current supplyIntegrated power supply, 90-240 VAC, 50/60 Hz
RPS port-48 VDC
Operating modesAC only, AC and DC, DC only
MTBF30 years
Operation temperature0 °C to 40 °C
Storage temperature-10 °C to 70 °C
Humidity10 % to 95 % non-condensing
CertificationsUL 60950, IEC 60950-1, EN 60950-1, CAN/CSA-C22.2 No. 60950
EmissionsCISPR 22 Class A, FCC Part 15 Class A, EN 55022 1998 Class A, ICES-003 Class A, VCCI Class A, EN 61000-3-2 2000, 61000-3-3
ImmunityEN 55024
IEEE standards802.1D, 802.1p, 802.1Q, 802.1w, 802.1X, 802.3, 802.3ad, 802.3ab, 802.3ae, 802.3i, 802.3u, 802.3x, 802.3z
Operating system3Com Operating System
Console portRJ-45
The HP Switch JE107A is a Layer-3 network switch with 48 ports, designed for use in medium to large enterprise networks. It features 48 inline power ports with 10BASE-T/100BASE-TX technology, configured with autonegotiation and Auto MDI/MDIX, as well as four Gigabit SFP ports for flexible high-speed connections. The switch supports Power over Ethernet (PoE) according to the IEEE 802.3af standard, enabling it to power end devices such as IP phones, surveillance cameras, or access points directly via the network cable. The integrated power supply supports multiple operating modes: pure AC operation, combined AC and DC operation, and pure DC operation, with a redundant DC RPS port (-48 VDC) provided for N+1 power supply redundancy. This enables seamless failover between AC and DC modes, enhancing fault tolerance.

Applications

The switch is suitable for use in structured networks, particularly in environments requiring high port density, PoE functions, and Layer-3 routing capabilities. Typical applications include office buildings, schools, hospitals, or industrial facilities where numerous PoE-enabled end devices must be connected. Support for 3Com XRN® Stacking allows chaining up to eight switch units, achieving a total of 384 10/100 ports. The stacking connection is made via the SFP ports on the front in an active/active load sharing configuration, providing high bandwidth and redundancy.

Functions and Equipment in Detail

The switch offers a forwarding bandwidth of 12.8 Gbit/s and can process up to 9.5 million packets per second. It supports 16,000 MAC addresses, enabling management of large network environments. Layer-2 functions include IEEE 802.1Q VLANs, 802.3ad LACP for link aggregation, 802.3x full-duplex flow control, 802.1D STP, and 802.1w RSTP for redundant network paths. Additional features include Fast Start with BPDU protection and IGMP v1/v2 multicast filtering. On the Layer-3 level, the switch provides hardware-based routing, ECMP, static and dynamic routing, RIPv1/v2, OSPF, ASIC-based Layer-3 forwarding, PIM-DM, PIM-SM, IGMP v1/v2 Snooping, and DHCP Relay.

Technology Explained Simply

The integrated power supply supports input voltages from 90 to 240 VAC at 50/60 Hz, ensuring worldwide usability. The PoE function enables power delivery to end devices over the network cable, eliminating the need for separate power supplies. Layer-3 functions allow routing between different network segments, enabling an efficient network architecture. VLAN support (Virtual Local Area Networks) allows logical separation of network traffic, enhancing security and management. QoS functions (Quality of Service) with IEEE 802.1p Class of Service and Weighted Round Robin/Fair/Strict Priority Queuing ensure prioritized processing of network data, which is especially important for time-critical applications such as VoIP or video transmission.

Compatibility and Accessories

The switch is equipped with an RJ-45 console port for direct configuration via a terminal device. For connecting to other network units or extending reach, SFP transceivers are suitable and can be inserted into the four SFP ports. Compatible accessories include patch cables in various lengths and categories (CAT5e, CAT6), suitable for connecting end devices or switches. Additionally, PoE testers and UPS solutions are available to support network security and availability.

Mounting and Installation

The switch is housed in a 1U 19-inch enclosure with dimensions of 440 mm (width) × 427 mm (depth) × 43.6 mm (height) and weighs 6.3 kg. It is designed for use in standard 19-inch racks and can be mounted there. Installation is done via the integrated power supply, with an operating temperature range of 0 °C to 40 °C. Storage is permitted at temperatures from -10 °C to 70 °C and relative humidity from 10 % to 95 % (non-condensing).

Operational Advantages

The switch offers high reliability with an MTBF of 30 years (263,000 hours). The hot-swap capability of switch units allows maintenance without network downtime. Support for multiple management tools such as web-based GUI, SNMP, Telnet, CLI, RMON-1, SMON, software backup/restore, Xmodem, FTP, TFTP, as well as network debugging tools like DHCP Tracker, UDP Helper, Traceroute, and Traffic Mirroring, simplifies network management. Security features include RADIUS authentication, SSHv1.5, access control lists, packet filtering, SNMP v3 encryption, IEEE 802.1X network login, VLAN auto-initiation, QoS profiling, and multi-level access privileges. Administrative password recovery is also supported.

Certifications and Standards

The switch complies with standards EN 60068 (IEC 68) for environmental conditions, CISPR 22 Class A, FCC Part 15 Class A, EN 55022 1998 Class A, ICES-003 Class A, VCCI Class A, EN 61000-3-2 2000 and 61000-3-3 for emissions, as well as EN 55024 for immunity. Safety approvals include UL 60950, IEC 60950-1, EN 60950-1, and CAN/CSA-C22.2 No. 60950. IEEE standards include 802.1D (STP), 802.1p (CoS), 802.1Q (VLANs), 802.1w (RSTP), 802.1X (Security), 802.3 (Ethernet), 802.3ad (Link Aggregation), 802.3ab (1000BASE-T), 802.3ae (10G Ethernet), 802.3i (10BASE-T), 802.3u (Fast Ethernet), 802.3x (Flow Control), and 802.3z (Gigabit Ethernet).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/895889
qrcode für HP JE107A switch 48xTP 100 Mbit POE