| General |
| Device type | SFP+ transceiver module |
| Type | Plug-in module |
| Connection system | Wired |
| Wiring type | 10GBase-SR |
| Data Link Protocol | 10 Gigabit Ethernet |
| Data transfer rate | 10 Gbps |
| Maximum transmission range | 300 m |
| Interfaces | 1 x Network - Ethernet 10GBase-SR - LC Multi-Mode x 2 |
| Compatible slots | 1 x SFP+ |
| Designed for | HP BLc3000 Enclosure, HP BLc7000 Single-Phase Enclosure, HP BLc7000 Three-Phase Enclosure, HP ProLiant DL360p Gen8, DL980 G7, HP Virtual Connect Flex-10 |
The HP SFP+-transceiver module (manufacturer number 455883-B21-2) is a plug-in module for use in server and network environments. It serves as an optical transceiver for data transmission in the 10-Gigabit-Ethernet standard (10GBase-SR) over multimode fiber optic cables. The module is specifically designed for use in HP Blade systems and certain ProLiant server models to ensure high data rates over short to medium distances.
Applications
The module is used in data centers and enterprise networks where high bandwidth and reliability are required. It is compatible with HP BladeSystem c-Class enclosures, particularly the BLc3000 and BLc7000 models, as well as servers such as the HP ProLiant DL360p Gen8 and DL980 G7. The module is used in combination with HP Virtual Connect Flex-10 network modules to enable flexible and scalable network architectures.
Functions and Features in Detail
The module supports the 10GBase-SR standard, designed for transmission over multimode fiber cables. It provides a data transfer rate of 10 Gbps and enables connection via LC multimode connectors. The interface is configured as 1 x Ethernet 10GBase-SR, with two LC connectors provided for bidirectional data transmission. The maximum transmission distance is 300 meters, with sources also indicating a range of up to 400 meters when using OM4 multimode fiber cables. This specification refers to the specific fiber quality and depends on the type of cable used.
Technology Explained Simply
The SFP+ form factor is a standardized module format for high-speed network connections. The module integrates an optical transmitter and receiver that transmit data over the fiber optic cable. The use of multimode fiber enables cost-effective and efficient data transmission over medium distances. The 10-Gigabit-Ethernet technology (10GbE) is suitable for applications with high data traffic such as virtualization, storage provisioning, and high-performance computing. Power supply is provided through the SFP+ slot in the network device, eliminating the need for an external power source.
Compatibility and Accessories
The module is intended for use in HP Blade systems and specific ProLiant server models. It can be installed in SFP+ slots integrated into the mentioned HP systems. Compatibility includes various configurations of BLc7000 enclosures, both Single-Phase and Three-Phase variants, as well as different configurations of DL360p Gen8 servers. Use with HP Virtual Connect Flex-10 modules enables flexible network connectivity within the Blade system.
Installation and Mounting
Installation is performed by simply inserting the module into the SFP+ slot of the respective device. No tools are required, and the connection is automatically recognized. Physical mounting occurs in the server or Blade system, with cabling connected via LC multimode connectors to the fiber optic cable. Correct alignment of the connectors is important to ensure a stable connection.
Operational Advantages
The module offers a high data transfer rate of 10 Gbps, suitable for time-critical applications and large data volumes. The use of multimode fiber cables enables a cost-efficient solution for medium transmission distances. Integration into HP systems ensures high compatibility and reliability. The plug-in technology allows for easy replacement and maintenance without interrupting the entire system.