Helukabel 83290, EAN: 4060892092589

Helukabel 83290 control cable 83290 grey

Cables > Control line > Flexible Control lines

Helukabel 83290 control cable 83290 grey

Lieske Part No. 332281
Mfg Part No 83290
EAN-Code 4060892092589
Manufacturer Helukabel
Here only 5,03 EUR
5,99 EUR incl. VAT

Further information for Helukabel 83290 control cable 83290 grey

General
Control cablespecial PVC control cable
UL standardStyle 2464
Conductor cross-sectionAWG 26–16
Nominal voltage300 V
Test voltage1500 V
Dielectric strength3000 V
Temperature range in motion-10 to +80 °C
Temperature range for fixed installation-20 to +80 °C
Minimum bending radius moving15x cable Ø
Minimum bending radius fixed installation7.5x cable Ø
Coupling resistancemax. 250 Ohm/km
Wire insulationSpecial PVC class 43
Conductor markingaccording to DIN 47100 or international colour code
Screeningtinned Cu wires, 85 % coverage
Outer sheathPVC class 43
Sheath colourBlack or grey
Flame retardancyUL VW-1, CSA FT1
Material propertiesSilicon- and cadmium-free, free of substances interfering with paint adhesion
Resistanceresistant to oil, solvents, acids, alkalis
Regulation lengths100 m, 500 m, 1000 m
EMC propertiesShielding for electromagnetic compatibility
Connection technologycutting clamp technology
The Helukabel control cable type 83290 is a flexible, shielded PVC control cable designed for use in electronics, control and regulation technology, as well as in measurement, signal and impulse technology. It meets the requirements of UL standardization Style 2464 and is designed for conductor cross-sections from AWG 26 to 16, with conductors specified according to UL Style 1061/1729 (AWG 26–20) and UL Style 1007/1569 (AWG 18–16). The cable is rated for a nominal voltage of 300 V and features a test voltage of 1500 V and a breakdown voltage of at least 3000 V, ensuring high electrical insulation performance.

Applications
This control cable is suitable for flexible connections in industrial and technical applications, particularly in areas requiring high mechanical durability and electromagnetic compatibility (EMC). It is commonly used in automation technology, manufacturing technology, and building automation, where it transmits signals between control devices, sensors, and actuators. The cable is suitable for both movable and fixed installations, with a temperature range of -10 °C to +80 °C for movable installations and -20 °C to +80 °C for fixed installations.

Functions and Features in Detail
The cable features a fine-stranded, tinned copper wire manufactured according to ASTM-B 174-95 class J-M (AWG 26–20) and ASTM-B 286 (AWG 18–16). The conductors are insulated with special PVC class 43, classified as semirigid according to UL Std.1581 tab.50.182 and 50.183. Conductor identification follows DIN 47100 or the international color code, ensuring clear identification of conductors. The conductors are stranded in layers with optimal lay lengths, enabling even distribution of mechanical stress and high flexibility. A separator foil ensures clear separation of conductor layers, while a filler strand enhances mechanical stability.

Technology Explained Simply
The shielding consists of tinned copper wires with a coverage of approximately 85 %, providing effective protection against electromagnetic interference. The outer sheath is made of PVC class 43 and complies with UL standardization requirements. The sheath color is either black (international color code) or gray. The cable is flame-retardant according to UL VW-1 and CSA FT1, offering enhanced fire safety. The minimum bending radius is 15 times the cable diameter for movable installations and 7.5 times the cable diameter for fixed installations, enabling flexible handling and installation. The coupling resistance is limited to a maximum of 250 Ohm/km, ensuring low signal distortion and high signal integrity.

Compatibility and Accessories
The control cable is suitable for use with cut-and-crimp technology, enabling quick and cost-effective termination. For optimal EMC performance, it is recommended to provide full, double-sided, and extensive contact to the copper braid. Unshielded analog types are available under the designation control cable UL (LiYY), which do not feature shielding.

Installation and Mounting
The cable can be installed in both movable and fixed applications. For movable installations, a minimum bending radius of 15 times the cable diameter must be observed; for fixed installations, it is 7.5 times the cable diameter. Installation is typically performed using cut-and-crimp technology, with the shielding contacted according to EMC optimization recommendations. The cable is available in standard lengths of 100 m, 500 m, and 1000 m.

Operational Advantages
The control cable offers high mechanical durability, good flexibility, and effective electromagnetic shielding. The materials used are resistant to oil, solvents, acids, and alkalis, enhancing suitability for industrial environments. The flame-retardant design according to UL VW-1 and CSA FT1 ensures increased safety. The cable is designed for long service life and is suitable for applications requiring high signal quality and reliability. The cut-and-crimp technology enables quick and cost-effective installation without additional tools or connection techniques.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/332281
qrcode für Helukabel 83290 control cable 83290 grey