Technical data:

Special PUR drag chain cable according to UL AWM Style 21223 or 20234 CSA AWM VDE registered
Temperature range moving -30°C to +80°C fixed -40°C to +80°C
Nominal voltage VDE U0/U 600/1000 V UL/CSA 1000 V
Test alternating voltage, 50 Hz 4000 V
Insulation resistance min. 20 MOhm x km
Coupling resistance max. 250 Ohm/km
Minimum bending radius moving 7.5x cable Ø fixed 4x cable Ø
Structure:
Bare copper strands, according to DIN VDE 0295 cl.6, extra fine wire, IEC 60228 cl.6
Core insulation made of halogen-free PP
Core shielding of the control cores in pairs with tinned copper braid
Power cores with the control pairs in layers with optimal Stranded with lay lengths and stabilizing fillers Fleece wrapping
to support sliding movement
Overall shielding made of tinned copper braid, optical coverage approx. 85%
Outer jacket made of PUR
Jacket color: orange (RAL 2003)
Properties:
Low-adhesion, flame-retardant, extremely abrasion-resistant, halogen-free, UV, oil, hydrolysis and microbe-resistant PUR outer jacket
Optimal insulation materials ensure resistance to oils (including mineral oils), greases, coolants, hydraulic fluids and numerous alkalis and solvents
The approx. 85% dense shielding braid optimally meets the requirements for electromagnetic compatibility (EMC)
These cables are manufactured according to high quality guidelines and comply with the DESINA® standard
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Resistant to cleaning agents and disinfectants in accordance with ECOLAB
tests:
PUR outer jacket self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1
Use:
In these cables, the power wires are ideally combined with the control wires for the braking function and thermal protection. For EMC compatibility, i.e. interference immunity, the cables have an additional overall shield. Production is based on the specifications of well-known servo drive and control manufacturers and in accordance with various VDE, UL and CSA standards. They are used in areas such as machine, plant and robot construction, automation, drive, control and production technology. Interesting for export-oriented machine and plant construction. Please observe the installation guidelines for use in energy chains. EMC = Electromagnetic compatibility To optimize the EMC properties, we recommend contacting the copper braid on both sides and over a large area all around.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.