Technical data:

Special PVC encoder cable according to UL/CSA
Temperature range moving -0°C to +60°C not moving -20°C to +80°C
Nominal voltage according to Siemens 30 V according to Bosch Rexroth and Lenze 300 V
Test alternating voltage, 50 Hz Core/core 1500 V Core/shield 1000 V
Minimum bending radius moving 15x cable Ø not moving 6x cable Ø min. 100,000 cycles
Structure:
Bare or tinned copper wire according to DIN VDE 0295 cl.6, extra-fine wire, IEC 60228 cl.6
Wire insulation made of special polypropylene
Wire colors on request
Overall shielding with tinned drain wire and tinned copper braid, approx. 85% coverage
Polyester film
Outer jacket made of PVC
Jacket color: green (RAL 6018) according to DESINA® or orange
Properties:
Outer jacket made of PVC, oil-resistant,
low-capacitance
The approx. 85% dense shielding braid optimally meets the requirements of electromagnetic compatibility (EMC)
These cables are manufactured according to high quality guidelines and correspond to the DESINA® standard
The materials used in production are silicone- and cadmium-free and free from substances that impair paint wetting
Tests:
PVC jacket flame-retardant in accordance with DIN EN 60332-1-1 to -1-3 (VDE 0482-332-1-1 to -1-3)
Use:
Affordable alternative to PUR encoder cables for use in fixed or occasionally moving applications. These low-capacity incremental encoder cables or position reporting cables transmit control pulses for the positioning and process characteristics of servo motors and are used as connection cables for tachometers, brakes and pulse generators in plant and mechanical engineering, as well as in control and automation technology. EMC = Electromagnetic Compatibility To optimize the EMC properties, we recommend contacting the copper braid on both sides and over a large area.
Standard lengths: 100 m, 500 m, 1000 m.
Subject to technical changes.