| General |
| Standards | DIN VDE 0285-525-2-31, DIN EN 50525-2-31, UL Std.1063, UL Style 10269, CSA-TEW, CSA-AWM I A/B |
| Cable type | H05V2-K / H07V2-K |
| Conductor material | Cu stranded wire bare fine-stranded |
| Insulation material | PVC compound type TI3 |
| Conductor marking | according to DIN VDE 0293 |
| Temperature range in motion | +5°C to +90°C |
| Temperature range, non-operating | -40°C to +90°C |
| Temperature range UL AWM | -40°C to +105°C |
| Temperature range CSA TEW | -40°C to +105°C |
| Rated voltage up to 1 mm² | 300/500 V |
| Nominal voltage from 1.5 mm² | 450/750 V |
| Rated voltage UL AWM AC | 1000 V |
| Rated voltage UL AWM DC | 1250 V |
| Rated voltage UL MTW | 600 V |
| Rated voltage CSA TEW | 600 V |
| Test voltage H05V2-K | 2000 V |
| Test voltage H07V2-K | 2500 V |
| Test voltage Spark Test 0.5 mm² | 5 kV |
| Test voltage Spark Test 0.75 mm² | 6 kV |
| Insulation resistance | min. 20 MΩ·km |
| Minimum bending radius up to 8 mm | 4x wire Ø |
| Minimum bending radius 8–12 mm | 5x wire Ø |
| Minimum bending radius >12 mm | 6x wire Ø |
| Flame retardancy | DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2, UL VW-1, CSA FT1 |
| Material release | Silicon- and cadmium-free, free of substances interfering with paint adhesion |
| Approvals | HAR, UL-AWM, UL-MTW, CSA-AWM, CSA-Equipment-wire |
| Regulation lengths | 100 m, 500 m, 1000 m |
The Helukabel wiring cable type 64204 is a fivefold standardized PVC single conductor, specifically designed for use in plant and machine engineering, particularly for export-oriented users. The product combines multiple international standards in one cable, enabling simplified bill of materials management and economical stockholding. The cable meets the requirements of DIN VDE 0285-525-2-31, DIN EN 50525-2-31, UL Standard 1063, UL Style 10269 (extended compared to Style 1015), as well as CSA-TEW and CSA-AWM I A/B. The CE marking confirms compliance with the Low Voltage Directive 2014/35/EU.
Applications
The cable is intended for use in industrial plants, machines, and equipment, particularly in environments requiring high mechanical and thermal load capacity as well as international certification. The fivefold standardization enables use in various markets, including Europe, North America, and other regions requiring UL and CSA approvals. The cable is suitable for fixed installation indoors and in protected outdoor areas, with temperature resistance and flame retardancy extending the range of application conditions.
Functions and Equipment in Detail
The cable consists of a bare, fine-stranded copper conductor of class 5 according to DIN VDE 0295, BS 6360, and IEC 60228, ensuring high flexibility and mechanical robustness. The core insulation is made from a PVC mixture type TI3, complying with the requirements of DIN VDE 0207-363-3, DIN EN 50363-3, CSA-C 22.2 No. 210 (Class H and Class 43), and UL Standard 1581. Core identification follows DIN VDE 0293, enabling clear identification of individual cores. The materials used are free of silicone, cadmium, and substances that could impair paint adhesion, ensuring processing quality and insulation integrity.
Technology Explained Simply
The cable is rated for a nominal voltage of 300/500 V when the cross-section is up to 1 mm² (H05V2-K), and 450/750 V from 1.5 mm² (H07V2-K). The test voltage is 2000 V for H05V2-K and 2500 V for H07V2-K. Insulation resistance is at least 20 MΩ·km, ensuring high electrical insulation. Temperature resistance ranges from +5 °C to +90 °C for moving installations, and from -40 °C to +90 °C for fixed installations. For UL-AWM, the temperature range is -40 °C to +105 °C; for CSA-TEW, also -40 °C to +105 °C. Spark test voltages are 5 kV for 0.5 mm² and 6 kV for 0.75 mm². The minimum bending radius for fixed installation is 4 times the core diameter up to 8 mm, 5 times for 8–12 mm, and 6 times from 12 mm.
Compatibility and Accessories
The cable is certified with approvals HAR, UL-AWM, UL-MTW, CSA-AWM, and CSA-Equipment-wire, ensuring broad compatibility with international requirements. These approvals allow use in various markets and reduce the need to stock multiple cable types for different regions. The cable is available in standard lengths of 100 m, 500 m, and 1000 m, facilitating planning and installation in industrial plants.
Installation and Mounting
The cable is designed for fixed installation and can be installed indoors and in protected outdoor areas. The PVC insulation is self-extinguishing and flame retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (equivalent to DIN VDE 0472 Part 804 Test Method B), UL VW-1, and CSA FT1. The flexibility and mechanical robustness of the fine-stranded copper conductor allow easy installation, especially in tight bends and with frequent movement. Core identification according to DIN VDE 0293 simplifies identification and wiring.
Operational Advantages
The fivefold standardization reduces material planning complexity and enables more efficient stockholding. High thermal and mechanical load capacity, along with flame-retardant PVC insulation, enhance operational safety. The use of materials free of silicone and cadmium ensures reliable processing and prevents disruptions in painting or coating processes. The cable is suitable for a wide range of industrial applications, particularly in machine engineering, plant engineering, and automation technology.