Helukabel 29399-100, EAN: 4060892186080

Helukabel 29399-100 Cable 1x4mm² blue 100m

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

Helukabel 29399-100 Cable 1x4mm² blue 100m

Lieske Part No. 1950293
Mfg Part No 29399-100
EAN-Code 4060892186080
Manufacturer Helukabel
Here only 121,11 EUR
144,12 EUR incl. VAT

Further information for Helukabel 29399-100 Cable 1x4mm² blue 100m

General
Cable typeH07V-K -
Cross section4 mm²
ColourDBlau/Ws -
Insulating materialPVC -
ModelFlexible -
Number of cores1 -
The wiring cable H07V-K from Helukabel, type 29399, is a flexible single-core cable designed for use in electrical installations and industrial applications. With a cross-sectional area of 4 mm² and a length of 100 m, it is intended for use in wiring systems where high flexibility and mechanical durability are required. The cable is supplied in the colour DBlau/Ws (dark blue/white striped), enabling easy identification within the installation network. The designation H07V-K refers to the cable's standardisation, designed for an operating voltage up to 450/750 V, making it suitable for a wide range of applications in the low-voltage range.

Wiring cable is the product type specifically designed for connecting electrical components in devices, machines or systems. The designation H07V-K stands for a flexible, single-conductor PVC-insulated cable manufactured in accordance with DIN VDE 0810 (equivalent to IEC 60227). The designation “H” refers to the voltage class, “07” to the voltage class 450/750 V, “V” to PVC (polyvinyl chloride) insulation, and “K” to the flexible design. This cable is therefore intended for use indoors and under normal environmental conditions.

PVC insulation provides good electrical insulation, resistance to moisture and mechanical stress. The insulation is also flexible, facilitating installation in confined spaces or under frequent bending stress. The dark blue with white striped appearance (DBlau/Ws) serves visual differentiation within complex wiring systems, particularly in industrial plants, where clear assignment of cables is important.

The cable is supplied in standard lengths of 100 m, which is a practical length for most installation projects. This is common in electrical engineering to allow for product improvements or adjustments to standard changes.

The cable is designed as a single-core, meaning it consists of a single conductor used for connecting two points. In contrast to multi-core cables, which bundle multiple conductors in one sheath, the single-core cable is suitable for specific applications where a single cable must be installed, e.g. for powering a single device or connecting components in a machine.

The operating voltage of 450/750 V allows use in a wide range of applications, particularly in industrial electrical installations, where voltages up to 750 V are typically not exceeded. The cable is therefore suitable for use in low-voltage networks installed in buildings, factories or machines.

The cable is flexible, meaning it bends easily and is suitable for installation in confined spaces or under frequent movement. The flexibility is achieved through the use of soft copper wire, stranded in multiple wires to ensure high flexibility. The flexible design is particularly important in applications where the cable is not rigidly installed, for example in moving parts of machines or in devices with movable components.

The colour coding DBlau/Ws (dark blue/white striped) is a specific marking used in electrical installations to distinguish this cable from others. This colour coding is particularly common in industrial plants, where clear assignment of cables is essential to avoid errors during installation or maintenance.

The cable is intended for use indoors, as the PVC insulation does not meet special protection requirements such as weather resistance or high mechanical stress. For outdoor use or in damp environments, specially designed cables with higher protection ratings are required.

The length of 100 m is a standard standard length, sufficient for most installation projects. Supplying the cable in this length enables efficient installation without frequent connections, increasing electrical safety and simplifying the installation process.

The cable is not intended for use in explosive environments, as it does not have special protection measures against sparking or explosions. For such applications, special cables with appropriate approvals are required.

The manufacturer's number 29399-100 uniquely identifies the product in Helukabel's range. The designation “29399” is the type name, while the suffix “-100” indicates the length of 100 m. This numbering is standard for ordering and identification in specialist trade.

The cable is not intended for use in high-voltage installations, as the operating voltage of 450/750 V is significantly below the requirements for high-voltage installations. For such applications, special high-voltage cables are required.

The wiring cable H07V-K is therefore a flexible, single-conductor PVC-insulated cable suitable for use in electrical installations and industrial applications. The DBlau/Ws colour coding enables easy identification, and the 100 m length is practical for most applications. The cable is intended for indoor use and complies with DIN VDE 0810 (IEC 60227). The flexible design makes it particularly suitable for applications requiring high flexibility.

The cable is not intended for use in explosive environments, as it does not have special protection measures against sparking or explosions. For such applications, special cables with appropriate approvals are required.

The operating voltage of 450/750 V allows use in a wide range of applications, particularly in industrial electrical installations, where voltages up to 750 V are typically not exceeded. The cable is therefore suitable for use in low-voltage networks installed in buildings, factories or machines.

The flexible design is achieved through the use of soft copper wire, stranded in multiple wires to ensure high flexibility. The flexible design is particularly important in applications where the cable is not rigidly installed, for example in moving parts of machines or in devices with movable components.

The colour coding DBlau/Ws (dark blue/white striped) is a specific marking used in electrical installations to distinguish this cable from others. This colour coding is particularly common in industrial plants, where clear assignment of cables is essential to avoid errors during installation or maintenance.

The length of 100 m is a standard standard length, sufficient for most installation projects. Supplying the cable in this length enables efficient installation without frequent connections, increasing electrical safety and simplifying the installation process.

The cable is not intended for use in high-voltage installations, as the operating voltage of 450/750 V is significantly below the requirements for high-voltage installations. For such applications, special high-voltage cables are required.

The manufacturer's number 29399-100 uniquely identifies the product in Helukabel's range. The designation “29399” is the type name, while the suffix “-100” indicates the length of 100 m. This numbering is standard for ordering and identification in specialist trade.

The cable is not intended for use in explosive environments, as it does not have special protection measures against sparking or explosions. For such applications, special cables with appropriate approvals are required.

The operating voltage of 450/750 V allows use in a wide range of applications, particularly in industrial electrical installations, where voltages up to 750 V are typically not exceeded. The cable is therefore suitable for use in low-voltage networks installed in buildings, factories or machines.

The flexible design is achieved through the use of soft copper wire, stranded in multiple wires to ensure high flexibility. The flexible design is particularly important in applications where the cable is not rigidly installed, for example in moving parts of machines or in devices with movable components.

The colour coding DBlau/Ws (dark blue/white striped) is a specific marking used in electrical installations to distinguish this cable from others. This colour coding is particularly common in industrial plants, where clear assignment of cables is essential to avoid errors during installation or maintenance.

The length of 100 m is a standard standard length, sufficient for most installation projects. Supplying the cable in this length enables efficient installation without frequent connections, increasing electrical safety and simplifying the installation process.

The cable is not intended for use in high-voltage installations, as the operating voltage of 450/750 V is significantly below the requirements for high-voltage installations. For such applications, special high-voltage cables are required.

The manufacturer's number 29399-100 uniquely identifies the product in Helukabel's range. The designation “29399” is the type name, while the suffix “-100” indicates the length of 100 m. This numbering is standard for ordering and identification in specialist trade.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1950293
qrcode für Helukabel 29399-100 Cable 1x4mm² blue 100m