| General |
| Standards | DIN VDE 0285-525-2-31, DIN EN 50525-2-31, IEC 60227-3 |
| Temperature range in motion | -5 °C |
| Temperature range, non-operating | -30 °C |
| Rated voltage U0/U | 450/750 V |
| Test voltage | 2500 V |
| Insulation resistance | 10 MOhm x km |
| Radiation resistance | 80x106 cJ/kg |
| Minimum bending radius for fixed installation (core Ø = 8 mm) | 4x wire Ø |
| Minimum bending radius for fixed installation (core Ø > 8–12 mm) | 5x wire Ø |
| Minimum bending radius for fixed installation (core Ø > 12 mm) | 6x wire Ø |
| Wire insulation | PVC blend type TI1 |
| Cu stranded wire | According to DIN VDE 0295 Class 5, fine-stranded |
| Self-extinguishing and flame retardant | according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 |
| Utilization | Installation in conduits, in and under plaster, in closed installation channels; internal wiring of devices, distributors, switchgear; protected installation in and on luminaires |
| Standard length | 100 m |
The H07V-K wiring cable from Helukabel, type 29189, is a PVC single-core cable for use in electrical installations and industrial applications. It is supplied in a standard length of 100 m and is intended for installation in conduits, in and under plaster, as well as in closed installation channels. The cable is not suitable for direct installation on trays, gutters, or troughs. It is approved for internal wiring of devices, distributors, and control panels, as well as for protected installation in and on lighting fixtures. The maximum rated voltage is 1000 V AC or 750 V DC to earth.
Applications
This cable is suitable for use in indoor environments and in closed installation systems where high mechanical and thermal stress resistance is required. It is particularly suitable for wiring in electrical devices, control panels, and lighting installations. Installation takes place in protected environments, and the cable is not intended for open or unprotected installations on supports.
Functions and Features in Detail
The cable consists of a bare Cu stranded conductor, manufactured according to DIN VDE 0295 class 5, BS 6360 class 5, and IEC 60228 class 5. The conductor is fine-stranded and offers high flexibility. The core insulation is made of PVC mixture type TI1, complying with standards DIN VDE 0207-363-3, DIN EN 50363-3, and IEC 60227-3. The materials used are free of silicone and cadmium, as well as free of substances that interfere with paint adhesion, improving processability and compatibility with paints and coatings.
Technical Details Explained
The cable is designed for a temperature range of -5°C to +70°C for movable installation and -30°C to +80°C for fixed installation. The rated voltage is 450/750 V, with a test voltage of 2500 V. The insulation resistance is at least 10 MΩ × km. The radiation resistance is up to 80×10⁶ cJ/kg (80 Mrad), enabling suitability for environments with increased radiation exposure. The minimum bending radius for fixed installation is 4× core Ø for a core Ø of 8 mm, 5× core Ø for a core Ø of 8–12 mm, and 6× core Ø for a core Ø above 12 mm.
Compatibility and Accessories
The cable is compatible with standards DIN VDE 0285-525-2-31, DIN EN 50525-2-31, and IEC 60227-3. It can be used in conjunction with other cables and wires that meet the same standards. Installation in closed channels and conduits is permitted, as is installation under plaster or within walls.
Installation and Mounting
Installation takes place in closed systems, with the cable being laid in conduits, in and under plaster, and in closed channels. The cable is installed fixed, and the minimum bending radius must be observed depending on the core Ø. The cable is not intended for open installations on supports.
Operational Advantages
The cable offers high mechanical and thermal stress resistance, as well as good flexibility. The PVC insulation is self-extinguishing and flame-retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, and IEC 60332-1-2 (equivalent to DIN VDE 0472 part 804 test method B), enhancing operational safety. The materials are free of harmful substances, improving processability and environmental compatibility. The cable is designed for long service life and is suitable for use in various industrial and electrical applications.