Technical data:

PVC single cores in accordance with DIN VDE 0285-525-2-31 / DIN EN 50525-2-31 and IEC 60227-3
Temperature range moving -5°C to +70°C stationary -30°C to +80°C
Nominal voltage U0/U 300/500 V
Test voltage 2000 V
Insulation resistance min. 10 MOhm x km
Minimum bending radius fixed installation 4x core Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Structure:
Bare copper wire, in accordance with DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of PVC compound type TI1 in accordance with DIN VDE 0207-363-3 / DIN EN 50363-3 and IEC 60227-3
Core identification see table below
Properties:
The materials used in production are free of silicone and cadmium and free of substances that impair paint wetting Tests
PVC self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (corresponds to DIN VDE 0472 Part 804 test type B)
Use:
These single cores are intended for the internal wiring of devices and for protected installation in and on lights, in dry rooms, in equipment, switchgear and distribution systems, in tubes on and under plaster, but only for signal and control circuits.
Standard lengths: 250 m, 1000 m
Subject to technical changes.